Sewar bought at Pudsey Militaria Fair.

David R · 30th November 2023, 01:25 PM

Went to my local militaria fair just outside Leeds UK, a bit sparse on both sides of the tables as there were two others on the same day. This turned up on one table, the guy always has something worth looking over, but very much "caveat emptor" as half the time, he does not know what he has and is honest about it. It was in a bit of a state so I cleaned it up, and show it here for advice and comment. The blade is now clean, rust and gunge free, but I don't know how far to take it further, if at all..... And yes, that is a keris scabbard top married to a sewar scabbard lower part.

Sajen · 30th November 2023, 11:19 PM

Hello David,

Interesting sewar!

I personally wouldn't go any further with the blade. Can we see how the blade fit inside the scabbard?

Regards,
Detlef

David R · 1st December 2023, 01:18 PM

It fits OK in the lower section, as for the upper....

Sajen · 2nd December 2023, 10:57 AM

Quote:

Originally Posted by David R

It fits OK in the lower section, as for the upper....

Thank you David but I've meant a pic with the blade inside the scabbard.

Regards,
Detlef

David R · 2nd December 2023, 11:10 AM

Here we are.

Sajen · 2nd December 2023, 11:21 AM

Hello David, I've meant a picture from up with the blade inside the scabbard to see how the blade fits inside the scabbard.

Regards,
Detlef

David R · 2nd December 2023, 04:43 PM

Are these adequate, I could post others from the better phone, but it's a right old rigmarole to do so.

Sajen · 2nd December 2023, 05:18 PM

This was what I wanted to see, thank you. The scabbard mouth is from a keris and a tribal repair for the lost original scabbard mouthpiece. It has its own charm!

Regards,
Detlef

30th November 2023, 01:25 PM	#1
David R Member Join Date: Jan 2011 Posts: 1,053	Sewar bought at Pudsey Militaria Fair. Went to my local militaria fair just outside Leeds UK, a bit sparse on both sides of the tables as there were two others on the same day. This turned up on one table, the guy always has something worth looking over, but very much "caveat emptor" as half the time, he does not know what he has and is honest about it. It was in a bit of a state so I cleaned it up, and show it here for advice and comment. The blade is now clean, rust and gunge free, but I don't know how far to take it further, if at all..... And yes, that is a keris scabbard top married to a sewar scabbard lower part. Attached Images

1st December 2023, 01:18 PM	#3
David R Member Join Date: Jan 2011 Posts: 1,053	It fits OK in the lower section, as for the upper.... Attached Images

2nd December 2023, 11:10 AM	#5
David R Member Join Date: Jan 2011 Posts: 1,053	Here we are. Attached Images

2nd December 2023, 04:43 PM	#7
David R Member Join Date: Jan 2011 Posts: 1,053	Are these adequate, I could post others from the better phone, but it's a right old rigmarole to do so. Attached Images

30th November 2023, 11:19 PM	#2
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,497	Hello David, Interesting sewar! I personally wouldn't go any further with the blade. Can we see how the blade fit inside the scabbard? Regards, Detlef

2nd December 2023, 11:21 AM	#6
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,497	Hello David, I've meant a picture from up with the blade inside the scabbard to see how the blade fits inside the scabbard. Regards, Detlef

2nd December 2023, 05:18 PM	#8
Sajen Member Join Date: Aug 2007 Location: Germany, Dortmund Posts: 8,497	This was what I wanted to see, thank you. The scabbard mouth is from a keris and a tribal repair for the lost original scabbard mouthpiece. It has its own charm! Regards, Detlef