Spanish Bilbo Circa 1700

Madnumforce · 1st January 2018, 06:29 PM

That's extremely interesting. Well, I'm not so interested in maker's marks, but discovering the Spanish tradition is something new to me. It's amazing to see typically Spanish designs surviving in renewed, late 18th century forms.

fernando · 1st January 2018, 09:25 PM

Quote:

Originally Posted by Madnumforce

That's extremely interesting. Well, I'm not so interested in maker's marks, but discovering the Spanish tradition is something new to me. It's amazing to see typically Spanish designs surviving in renewed, late 18th century forms.

Personally i am a passionate of marks. It is a vast universe to dive in. Just don't push me into it

..

Cathey · 2nd January 2018, 12:18 AM

Hi Fernando

I am also passionate about marks but find them very frustrating. The only H I could find that vaguely resembled the mark on this sword was listed as Maria Hortuna 17th Century Esoana (Toledo) Ref LENKIEWICZ-Zygmunt 1000 Marks of European Blade Makers Pp29. I have attached the extract.

As for this H or whatever it is, looks like a squat H to me though, I am hoping someone out there has seen it before and can shed some light on it.

With regard to this sword, what appears to be unusual is that it is a backsword blade, not broadsword. All of these swords in my reference books are broadswords. This might be why the previous owner was of the opinion that the blade predates the hilt and that the original engraving has been removed or altered to accommodate a latter monarch.

Any other examples of these swords with backsword blades would be appreciated.

Also, this example has straight quillons, any thoughts about when these came in or where they around at the same time as the curved ones.

Cheers Cathey and Rex

fernando · 2nd January 2018, 05:43 PM

Let me still take some shots before more knowledged members show up to correct me ... which is not so difficult.
Hortuño Maria instead of Maria Hortuño makes all the difference ... in gender.
Hortuño being male, is not uncommon to have (female) Maria as a second name over here. Still i gather that this smith doesn't figure within this issue, nor he figures in listings by Palomares, Leguina, Gestoso or even Lhermite, who has been in Toledo around 1600 and listed its smiths and their marks. It could well be a less published smith, working for a contract; however his ambiguous mark (a H or maybe a small animal) on a rapier doens't appear to to fit in your case.
I had a further reading on these swords, a subject as vast as a bottomless well. The Boca de Caballo (assymmetrical shells) hilt had its beginnning in the XVII century, with the so called modelo 1650. It is also registered that such model had straight quillons.
Concerning blade markings ant their meddling with, authors like Juan L. Calvó admit the possibility of blades imported from Germany (Solingen) (before the opening of the Toledo factory in 1760) having their original inscriptons changed to more fit Spanish (Castillian) legends, but also possible that smiths installed in Spain marked their blades as produced in Germany to favour their commercialization.

http://www.elgrancapitan.org/foro/viewtopic.php?t=14794

On the other hand, one may notice that the Carlos IV initials (Cs. IV) in blades are rather identical to the one you have in your example, as may be seen in swords mounted for other military branches like Infantry, and such blades having a square back along more than 1/3 and double edgded until the point.
So for the approach of the blade predating the hilt, in another angle is the hilt that predates the blade. Definitely the (doubtful) H mark in the ricasso from (misterious ) Hortuño Maria would give a great push to cracking the riddle.

.

Foxbat · 2nd January 2018, 08:04 PM

Quote:

Originally Posted by Cathey

Hi Fernando

With regard to this sword, what appears to be unusual is that it is a backsword blade, not broadsword. All of these swords in my reference books are broadswords.

Hello,

I can't see that in the pictures - to my eyes it looks like both edges are the same - no?

Cathey · 3rd January 2018, 05:08 AM

Hi Guys

the picture does not show it well but the blade is a back sword for 2/3 rd's and spear for the remaining length.

Cheers Cathey and Rex

Victrix · 3rd January 2018, 06:14 AM

Hi Cathey and Rex,

Lovely sword! Thanks for posting. I can see the flat edge in the top right photo. Lange messer springs to mind. It’s clearly intended as a cutting (chopping) weapon. Interesting that the blade has no fullers so the strenth is more important than agility. It seems to me that these Boca de Caballos or Espada de Conchas are all different, especially the blades. So production was not standardized and the customer was likely able to choose his favoured blade on which the hafters had fashioned a hilt. Is it possible that the ”H” is a picture of a small animal, like a perillo?

Best wishes for the New Year 2018.

fernando · 3rd January 2018, 02:33 PM

Quote:

Originally Posted by Victrix

...It seems to me that these Boca de Caballos or Espada de Conchas are all different, especially the blades. So production was not standardized and the customer was likely able to choose his favoured blade on which the hafters had fashioned a hilt...

Apparently efforts were made throughout first mid XVII century to obtain a definite normalization, but we have to consider that non rank and file versions were still of free choice

Quote:

Originally Posted by Victrix

... Is it possible that the ”H” is a picture of a small animal, like a perillo?...

It would have to be an atypical version

. Looking again into this, we see no trace of this punzon in the Catalogue of the Real Armeria, either. The only 'somehow' resembling this mark i spotted is in Gyngell's ARMOURERS MARKS (1959) as a secondary (?) mark for Juanes de la Huerta, AKA Juan de la Horta, or Orta, a famous master active in the XVI century. Don't ask me where in hell Gyngell found this mark, or a blade with it.

.

2nd January 2018, 12:18 AM	#3
Cathey Member Join Date: Oct 2009 Location: adelaide south australia Posts: 276	Boca de Caballo Sword Hi Fernando I am also passionate about marks but find them very frustrating. The only H I could find that vaguely resembled the mark on this sword was listed as Maria Hortuna 17th Century Esoana (Toledo) Ref LENKIEWICZ-Zygmunt 1000 Marks of European Blade Makers Pp29. I have attached the extract. As for this H or whatever it is, looks like a squat H to me though, I am hoping someone out there has seen it before and can shed some light on it. With regard to this sword, what appears to be unusual is that it is a backsword blade, not broadsword. All of these swords in my reference books are broadswords. This might be why the previous owner was of the opinion that the blade predates the hilt and that the original engraving has been removed or altered to accommodate a latter monarch. Any other examples of these swords with backsword blades would be appreciated. Also, this example has straight quillons, any thoughts about when these came in or where they around at the same time as the curved ones. Cheers Cathey and Rex Attached Images

2nd January 2018, 05:43 PM	#4
fernando Lead Moderator European Armoury Join Date: Dec 2004 Location: Portugal Posts: 9,645	Let me still take some shots before more knowledged members show up to correct me ... which is not so difficult. Hortuño Maria instead of Maria Hortuño makes all the difference ... in gender. Hortuño being male, is not uncommon to have (female) Maria as a second name over here. Still i gather that this smith doesn't figure within this issue, nor he figures in listings by Palomares, Leguina, Gestoso or even Lhermite, who has been in Toledo around 1600 and listed its smiths and their marks. It could well be a less published smith, working for a contract; however his ambiguous mark (a H or maybe a small animal) on a rapier doens't appear to to fit in your case. I had a further reading on these swords, a subject as vast as a bottomless well. The Boca de Caballo (assymmetrical shells) hilt had its beginnning in the XVII century, with the so called modelo 1650. It is also registered that such model had straight quillons. Concerning blade markings ant their meddling with, authors like Juan L. Calvó admit the possibility of blades imported from Germany (Solingen) (before the opening of the Toledo factory in 1760) having their original inscriptons changed to more fit Spanish (Castillian) legends, but also possible that smiths installed in Spain marked their blades as produced in Germany to favour their commercialization. http://www.elgrancapitan.org/foro/viewtopic.php?t=14794 On the other hand, one may notice that the Carlos IV initials (Cs. IV) in blades are rather identical to the one you have in your example, as may be seen in swords mounted for other military branches like Infantry, and such blades having a square back along more than 1/3 and double edgded until the point. So for the approach of the blade predating the hilt, in another angle is the hilt that predates the blade. Definitely the (doubtful) H mark in the ricasso from (misterious ) Hortuño Maria would give a great push to cracking the riddle. . Attached Images

3rd January 2018, 05:08 AM	#6
Cathey Member Join Date: Oct 2009 Location: adelaide south australia Posts: 276	Yes it's a backsword Hi Guys the picture does not show it well but the blade is a back sword for 2/3 rd's and spear for the remaining length. Cheers Cathey and Rex

1st January 2018, 06:29 PM	#1
Madnumforce Member Join Date: Jun 2017 Posts: 28	That's extremely interesting. Well, I'm not so interested in maker's marks, but discovering the Spanish tradition is something new to me. It's amazing to see typically Spanish designs surviving in renewed, late 18th century forms.

3rd January 2018, 06:14 AM	#7
Victrix Member Join Date: Apr 2017 Location: Sweden Posts: 682	Hi Cathey and Rex, Lovely sword! Thanks for posting. I can see the flat edge in the top right photo. Lange messer springs to mind. It’s clearly intended as a cutting (chopping) weapon. Interesting that the blade has no fullers so the strenth is more important than agility. It seems to me that these Boca de Caballos or Espada de Conchas are all different, especially the blades. So production was not standardized and the customer was likely able to choose his favoured blade on which the hafters had fashioned a hilt. Is it possible that the ”H” is a picture of a small animal, like a perillo? Best wishes for the New Year 2018.