14th October 2018, 06:18 PM | #31 |
Member
Join Date: Mar 2017
Posts: 143
|
Hello All.
I always assumed the extensions to the butt of these guns was related to either: 1) Balance when carried (possible counterwight to barrel), 2) Reloading with the butt placed on sandy/rugged ground , 3) Possible use as a club. Obviously over time the original function could have been forgotten and the feature have been maintained as something traditional. Just a thought on the topic. Nice piece Markku, have a similar one. |
14th October 2018, 07:57 PM | #32 | |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
Quote:
#2 Why would a wooden pad be added to a wooden stock to avoid contamination by sand? The folds of the skin covering (often seen on these butts) would be more likely to harbor sand than a plain wooden stock. #3 If the gun ended up being used as a club, the existing stock would be more than sufficient to knock a person out. Certainly the original reason for the butt "pads" remains a mystery but I do not believe that the reason is any of the above ideas. Most likely as has been said in above posts, the butt is designed to "soften" the recoil, or is just a matter of taste. Stu Last edited by kahnjar1; 15th October 2018 at 12:11 AM. |
|
14th October 2018, 08:46 PM | #33 |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 697
|
Yes probably to soften the recoil as the rifle butt is otherwise fairly narrow (but why convex and not concave?). In addition I notice that these rifles don’t have slings attached to them. So the buttpads may also help to prevent the butt from sliding out from under the bend of the arm when riding a horse or camel?
|
14th October 2018, 09:13 PM | #34 | |
Member
Join Date: Mar 2017
Posts: 143
|
Quote:
Point 1. The sizes of these additions vary. Either way the centre of balance would be shifted, which may or may not have been desired by the tribal users. Point 2. If you look at the base of the stocks with the additions, they are often quite worn. Many examples are not fur covered. Point 3. If you say so. Hard to know at this point. 'Taste' would here be a question of cultural norms related to weapons. Elgood mentions absorbsion of recoil but does not elaborate, but it would be interesting to hear explanations from the tribal users of these weapons, or their decendants. Last edited by Jon MB; 14th October 2018 at 09:24 PM. |
|
14th October 2018, 09:37 PM | #35 | |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
Quote:
Yes I have owned in the past a couple of these guns but stupidly sold them in a weak moment In answer to your comments, I agree that the sizes do vary BUT they are only made of wood and weigh next to nothing in comparison to the barrel. Yes some are worn but then many old gunstocks show signs of wear. I would guess that these get rougher treatment than (for instance) a European gun. As far as use as a "club" goes I certainly would not like to have one aimed at my head. As you say it's hard to tell but I would not like to be on the receiving end! Stu |
|
14th October 2018, 10:16 PM | #36 |
Member
Join Date: Mar 2017
Posts: 143
|
Thank you Stu.
|
15th October 2018, 12:21 AM | #37 | |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
Quote:
Not all Middle Eastern guns have sling attachment rings, but the subject gun and also others shown in this thread do have rings on the side for attachment of a sling or retaining strap. Stu |
|
15th October 2018, 03:10 PM | #38 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
It's the wood half-circle Arab alteration that is still a mystery to me. I just view it as a styling technique from tradition. Can't come up with a different reason. Rick |
|
15th October 2018, 03:33 PM | #39 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Rick |
|
15th October 2018, 03:38 PM | #40 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
I could not help but notice the wrap-around type decoration on the butt stock of your gun is almost identical to the butt stock of that duel ignition gun I posted. Both Coorg guns. Rick |
|
15th October 2018, 03:57 PM | #41 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Item 2 you mention above is something I believe is often over-looked when studying these shoulder guns. With the exception of the thick, leather pads which would seem obvious to reduce recoil, the separate wood butt cap, whether Arab, Coorg, or even Ottoman leads me to believe you are correct. Should the gun be traded or sold, the user could change the Length of Pull (LOP) to accommodate a different shooter by just extending or shortening the butt cap. It's why I believe the Ottoman guns butt stocks were always made in two pieces. It's also what makes these guns a bit difficult to shoot today. The LOP typically being between 11 and 12 inches. Whereas the European guns would be closer to 13 to 13.5 inches. Today's shooters average 14 inches. And, as you mention, the grips on the tulwar swords are smaller than their European counterparts. Quite interesting. Rick |
|
17th October 2018, 04:43 AM | #42 |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
To add to the interesting information and discussion above, here is Elgood's take on the Indo-Arab gun, from his book Firearms of the Islamic World (in the Tareq Rajab Museum, Kuwait).
Hope you find it of interest. Stu |
17th October 2018, 03:00 PM | #43 |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Thanks Stu. Most interesting. Glad I have this book.
Rick |
17th October 2018, 03:12 PM | #44 | |
Member
Join Date: Jan 2008
Posts: 1,430
|
Quote:
You may be interested to know that the middle gun you have illustrated (no. 125) now in the Kuwait Museum, was the one once owned by me. Bought in an antique shop in Abu Dhabi and which I foolishly sold later in the UK. Colin |
|
17th October 2018, 06:16 PM | #45 |
Member
Join Date: Mar 2017
Posts: 143
|
Oh! And I was just about to comment on the beauty that is no. 125...
|
17th October 2018, 07:49 PM | #46 | |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
Quote:
|
|
19th October 2018, 03:07 PM | #47 | |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Quote:
Rick |
|
1st December 2018, 09:14 AM | #48 |
Member
Join Date: Jan 2008
Posts: 1,430
|
Found this image from The National Museum of Yemen, Sana'a which might interest. Note the guns in the display case in the background...
|
2nd December 2018, 08:05 AM | #49 | |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
Quote:
Interesting that all the long guns shown on display appear to have the butt "extension" which perhaps suggests that the feature COULD be typical only to that region. Certainly the Omani matchlock does not have the butt extension (see pic), and to my knowledge it is the only other type of matchlock peculiar to the Arabian Peninsula. Stu |
|
2nd December 2018, 10:18 AM | #50 | |
Member
Join Date: Jun 2013
Posts: 2,145
|
Quote:
|
|
2nd December 2018, 05:25 PM | #51 |
Member
Join Date: Jun 2013
Posts: 2,145
|
Here two photos of Ottoman matchlocks in Istanbul.
The link is very clear to me... |
2nd December 2018, 06:19 PM | #52 |
Member
Join Date: Jul 2010
Location: St. Louis, MO area.
Posts: 1,623
|
Wonderful pics guys. And a very interesting Thread.
Rick |
2nd December 2018, 06:58 PM | #53 |
Member
Join Date: Aug 2007
Location: CHRISTCHURCH NEW ZEALAND
Posts: 2,739
|
A question re the guns shown in the pic posted by KUBUR....... the 2 on the right certainly look to be Turkish as described by the museum item labels, as the butt shape looks typically from that region, however the one on the left is typical of the subject gun of this thread.........mislabeled???
Stu Last edited by kahnjar1; 3rd December 2018 at 02:21 AM. |
17th May 2021, 01:03 PM | #54 |
Member
Join Date: Jan 2011
Posts: 1,079
|
Regarding the Arab style butt, years ago when these were often referred to as "Camel guns" I was told that they were often "tap loaded" from horse or camel back.
Tap loading is done without the use of a ramrod, powder and shot are put down the barrel and the butt then banged on the ground to force the load down to the breech. If the touch hole was large enough it would prime the pan as well, if it was a flintlock. The large butt extension could make sense in these circumstances. |
17th May 2021, 09:26 PM | #55 | |
Member
Join Date: Apr 2017
Location: Sweden
Posts: 697
|
Quote:
|
|
17th May 2021, 10:22 PM | #56 |
Member
Join Date: Jan 2011
Posts: 1,079
|
I have "tap loaded" back when I shot muzzle loaders and it is faster than ramming... but always a bit risky if you put a ball down there.
Napoleonic armies did it a lot to increase rate of fire, the record is 12 rounds in one minute by one of Wellingtons veterans. |
|
|