13th June 2016, 03:34 PM | #1 |
Member
Join Date: May 2014
Posts: 17
|
Philippine monosteel Blades. Preserving and restoring
Hello Everyone,
I would like to ask what is monosteel(Philippine monosteel blades)? What's its history? Made of? Automobile coil? Leafspring? Can you age the blade if its monosteel construction? How do you get rid of rust on monosteel blade? Does the same rust removal techniques for laminated blades apply? Polishing and etching? Would you apply vinegar or other etching acids(citric acids or Fecl) to a rusty monosteel blade? Thanks! Oldschldude Blade dark spot early rust. Slightly surface rust. Pitted rust spots. Crusty rust whole blade. |
13th June 2016, 06:07 PM | #2 | |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
|
Quote:
Regards, Detlef |
|
13th June 2016, 07:17 PM | #3 |
Member
Join Date: Nov 2013
Posts: 456
|
I have a WWII era monosteel Barong, the seller said the steel came from a downed Japanese fighter plane. I have no reason to believe this is true though.
|
13th June 2016, 10:00 PM | #4 | |
Member
Join Date: Mar 2012
Posts: 422
|
Quote:
|
|
14th June 2016, 02:47 PM | #5 | |
Member
Join Date: Jun 2012
Location: USA
Posts: 1,497
|
Quote:
|
|
14th June 2016, 02:59 PM | #6 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
|
Agree, when you don't have polished and etched the blade you can't know if the blade is monosteel. So my first post where I've asked for pictures.
I have some Luzon blades which seems to be worked from rasps. You never will be able to tell which steel is used until you have cleaned and etched the blade. See for example here: http://www.vikingsword.com/vb/showth...ighlight=luzon Regards, Detlef |
14th June 2016, 03:20 PM | #7 | |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
|
Quote:
Not every blade need to be polished and etched but it should be cleaned from active rust. By cleaning you will learn also about the blade material and forging. See for example here: http://www.vikingsword.com/vb/showth...ghlight=apalit The bolo I've shown overthere I get with a complete rusted blade which is cleaned now but not etched. One day I will etch it maybe but until now I am not sure which steel is used nor I am able to tell if the blade is laminated. Hope it will help a little bit. Regards, Detlef |
|
14th June 2016, 08:21 PM | #8 |
Member
Join Date: May 2014
Posts: 17
|
Monosteel barong
Hello Everyone,
Thanks estcrh, Timo Nieminen, blue lander for your replies and thanks Detlef for the pics and link you had provided. I've been trying to attach pics but having problems uploading...I will try again later. Thanks! Oldschldude |
15th June 2016, 01:04 AM | #9 |
Member
Join Date: May 2014
Posts: 17
|
barong pics
Hello.
I'm back with pics. Finally figured out how to compress photos using MS Paint. Most info that I read about rust removal or blade restoration was on laminated Philippine blades. Didn't know if etching also applies to mono steal. I'm attaching my barong pics that I would like to clean the blade. It started to get dark spots and small pits. I would hate to ruin it by improperly cleaning the blade. I would like to get rid of the dark spots and don't know if etching it would ruin the blade or change to different color. I will use warm vinegar if I will etch it. I never etched a blade before, I only apply oil to preserve it. Most of my info in blade restoration I got here and I think this barong is mono steel. One question is, When did the filipinos start using leafsprings? WW2 era or before that like in Span-Am War. Thanks again everyone. Oldschldude |
15th June 2016, 01:23 AM | #10 | |
Member
Join Date: May 2014
Posts: 17
|
etching
Quote:
If I have this stage of rust on my mono steel blade, can i put a sword with this stage of rust in a plastic pipe filled with pineapple juice after i polish the blade or will warm vinegar will do its work maybe a couple of passes/cycle of vinegar etching. By the way, you did an excellent job on this blade. Thanks again. Oldschhldude |
|
15th June 2016, 01:27 AM | #11 | |
Member
Join Date: May 2014
Posts: 17
|
Quote:
Hello, On your reply above, "Not every blade need to be polished and etched but it should be cleaned from active rust." How do you do that? Get rid of active rust... Thanks Oldschldude |
|
15th June 2016, 07:29 PM | #12 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
|
Hello Oldschldude,
the blade from the Luzon sword in up I've cleaned with sandpaper only, by such a rusted blade you can start with 80 and can end with 1000 to get a nice smooth finish but know people which go higher. Your barong blade don't seems to have bad rust so I would start with 120 or 160 paper. I bet that your blade will show lamination, look close to the spine if you can see lamination lines. I wouldn't clean such a blade with any sort of acid like pineapple juice, the blade will get a grey/dull surface and it will need a lot of polishing to get it away again. The sandpaper you can use dry or with oil. Before you start to etch a blade clean it with aceton to remove all oil and grease. Thank you for the compliment. Best regards, Detlef |
15th June 2016, 08:11 PM | #13 | |
Member
Join Date: May 2014
Posts: 17
|
Quote:
Either to etch or not to etch after polishing and the kinds of acid/techniques to use and their effects for etching. Also to restore or just to stop the rust or just leave it alone(oil) if blade has provenance of importance as someone on this forum mentioned. I will post pics before and after of this barong. As for the history of materials used for construction, I found this site just now. SANDATA — THE EDGED WEAPONS OF THE PHILIPPINES http://www.arscives.com/historysteel...troduction.htm Thanks again Detlef and everyone... Oldschldude |
|
16th June 2016, 07:04 PM | #14 | |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
|
Quote:
|
|
|
|