Can anyone give more info

Robert · 18th January 2007, 04:57 AM

Fenlander,
One of the easiest ways I've found to remove rust like this is to use Mothers Mag & Aluminum Polish (found in just about any automotive department) and 0000 steel wool. Clean the blade with ammonia to remove any oil and then wipe on a thin layer of the polish. Let it set for a couple of minutes. Put a small amount of the polish on the steel wool and rub the blade until the desired amount of rust is removed. This has worked well for me. Afterward wipe the blade clean with a clean soft cloth and wax (I use Ren Wax) to keep moisture off the blade. I hope that this helps.

Robert

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

18th January 2007, 04:57 AM	#4
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Fenlander, One of the easiest ways I've found to remove rust like this is to use Mothers Mag & Aluminum Polish (found in just about any automotive department) and 0000 steel wool. Clean the blade with ammonia to remove any oil and then wipe on a thin layer of the polish. Let it set for a couple of minutes. Put a small amount of the polish on the steel wool and rub the blade until the desired amount of rust is removed. This has worked well for me. Afterward wipe the blade clean with a clean soft cloth and wax (I use Ren Wax) to keep moisture off the blade. I hope that this helps. Robert