A different Pamor which is not folded but pasted

[HughChen]

Originally Posted by A. G. Maisey

I cannot see any actual dents in the blade. There are a few irregularities a few areas where rust has caused some blade erosion, but dents I cannot find.

Dents can appear because of the loss of a piece of lamination, or because of a large area of untreated rust. Prior to staining Balinese blades are polished, and this polish & then stain process occurs pretty regularly, for some keris it might occur every year.

In respect of staining, the usual commercial blade stain is normally done by soaking, but the staining process for single blades is a hands on process, & the stain process for valuable or highly esteemed blades is different again. I do not like the usual result from the soak method of staining, & it seems to not last as long as the other more labour intensive ways of staining a blade.

Hello， Alan. Why do they need to do the polish & then stain process so frequently? Isn't that after stain the Keris become stainless?