|
|
|
11th August 2022, 11:47 PM
|
#1 |
|
Member
Join Date: Apr 2020
Posts: 46
|
Raf I believe there is less shot half way still stuck in the barrel, is there a way to try and get this out ?
|
|
|
|
31st August 2022, 10:49 PM
|
#2 |
|
Member
Join Date: Jul 2006
Location: musorian territory
Posts: 439
|
To remove the stuck ball.. If it is lead you can use a special tool to remove the stuck lead ball it is like a corkscrew on a cleaning rod.. But these are made only in large sizes.. I dont know the bore size.. If its lightly stuck in a small bore you can take an aircompressor nozzle make a tight seal on the touch hole and fire a shot of compressed air down the barrel.. It will work especially if you put some fine machine oil or wd40 down first. Put a little at both the touch hole and the muzzel and then send the air down.. You can also loosen it by putting some cleaning liquid down and boiling the gun in how water then oil.. Then compressed air.. Keep you eyes clear of the muzzel....
|
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Hybrid Mode
