Antique ottoman... ehm... something

fernando · 8th June 2006, 09:55 PM

How much of an openning vent do you get when you pull up that springed cap ... any at all ? as if this would define whether it is for pouring in (whatever) or breathing out (whatever) ... or both.

Mark · 8th June 2006, 10:10 PM

Some questions:

1) Is the cylinder in the background part of it? It looks like a stand for something. In any event, the object looks like it was made to sit on/in something that hid the lower part.

2) Is it even water (or oil) tight? That would be a good clue about whether it is a hot water bottle of some sort.

3) Ham sounds pretty sure it is a tabiki sahandir, or a modified one at any rate, and Rick suggested that the top and bottom could have been stuck together later. Is this the answer?

4) I'm still not clear what the "springed mounted" cap is. Can you pull it up far enough to get a look inside, or is how it looks in the photo as far out as it goes? If it is, the fact that it comes out crookedly like that could well be because of a tab that could be turned ro line up with the slot in the body & permit the whole cap to come out, as again Rick suggested.

5) What is it made out of? It looks like copper or maybe bronze in the photos, with brass used in the band around the equator of the thing.

6) Any evidence on the bottom that it was exposed to flame, or at least heat?

It looks nice, whatever it is. Maybe it is just a "thing."

Valjhun · 9th June 2006, 09:20 AM

Hi,

Tim, Rather, I've managed to open it and I believe it to be really a bed warmer! Definetly something one would put water into, 'cos it is quite heavily "laquered" in the inside, and yes, it is water tight.

No, Mark, that cylinder is a qajar candle holder http://www.vikingsword.com/vb/showth...ighlight=qajar

It is not copper made however, white metal with great patina!

No evidence of heating the bottom.

Thank to all of you, for solving that mistery!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

8th June 2006, 09:55 PM	#1
fernando (deceased) Join Date: Dec 2004 Location: Portugal Posts: 9,694	How much of an openning vent do you get when you pull up that springed cap ... any at all ? as if this would define whether it is for pouring in (whatever) or breathing out (whatever) ... or both.

8th June 2006, 10:10 PM	#2
Mark Member Join Date: Dec 2004 Posts: 987	Some questions: 1) Is the cylinder in the background part of it? It looks like a stand for something. In any event, the object looks like it was made to sit on/in something that hid the lower part. 2) Is it even water (or oil) tight? That would be a good clue about whether it is a hot water bottle of some sort. 3) Ham sounds pretty sure it is a tabiki sahandir, or a modified one at any rate, and Rick suggested that the top and bottom could have been stuck together later. Is this the answer? 4) I'm still not clear what the "springed mounted" cap is. Can you pull it up far enough to get a look inside, or is how it looks in the photo as far out as it goes? If it is, the fact that it comes out crookedly like that could well be because of a tab that could be turned ro line up with the slot in the body & permit the whole cap to come out, as again Rick suggested. 5) What is it made out of? It looks like copper or maybe bronze in the photos, with brass used in the band around the equator of the thing. 6) Any evidence on the bottom that it was exposed to flame, or at least heat? It looks nice, whatever it is. Maybe it is just a "thing."

9th June 2006, 09:20 AM	#3
Valjhun Member Join Date: Dec 2005 Posts: 692	Hi, Tim, Rather, I've managed to open it and I believe it to be really a bed warmer! Definetly something one would put water into, 'cos it is quite heavily "laquered" in the inside, and yes, it is water tight. No, Mark, that cylinder is a qajar candle holder http://www.vikingsword.com/vb/showth...ighlight=qajar It is not copper made however, white metal with great patina! No evidence of heating the bottom. Thank to all of you, for solving that mistery!