Vasily Vereshchagin "Indian poem"

[ariel]

Originally Posted by mahratt

. And there Bukhara shashkas with 3 rivets on the handle.This writes Torben Flindt and Vereshchagin, who painted them in the 19th century

Sorry, but this is a circular argument: " Vereshchagin's depiction of a Bukharan shashka with 3 rivets is historically correct because Vereshchagin painted a Bukharan shashka with 3 rivets"


And thank you for bringing yet more examples of Bukharan shashkas, all with 5 rivets.

Any examples of a 3-riveted one in your collection of images?

[mahratt]

Originally Posted by ariel

Sorry, but this is a circular argument: " Vereshchagin's depiction of a Bukharan shashka with 3 rivets is historically correct because Vereshchagin painted a Bukharan shashka with 3 rivets"

And thank you for bringing yet more examples of Bukharan shashkas, all with 5 rivets.

I am glad to help you. I put the picture with 5 rivets, because:
1) are the most widespread Bukhara shashkas
2) on these drafts rivets - large, such as described by Torben Flindt.

There is no lasting circle. There is an example in the picture Vereshchagin, confirming the words Torben Flindt.
Torben Flindt says that on the handles of Bukhara shashkas from 3 to 5 rivets. Do you think that Torben Flindt made a mistake? I am very interested to hear your opinion on this issue.

Of course, I know that you are very good expert and collector. But in this matter trust more Torben Flindt. I'm sorry for this insolence.

Originally Posted by ariel

Any examples of a 3-riveted one in your collection of images?

Unfortunately, in my collection of Bukhara Shashkas with 3 rivets not. Like you, for 2 of my Bukhara shashkas 5 rivets on the handle (probably the most common option).
But thank you very much Artzi Yarom for his "bank" (reserve) the image^

http://oriental-arms.com/item.php?id=3912

Now I hope you are happy? Or will you continue to not believe Torben Flindt?

[ariel]

Originally Posted by mahratt

Now I hope you are happy? Or will you continue to not believe Torben Flindt?

This is just like the one you yourself rejected on the Russian forum because the handle is a replacement.

[mahratt]

Originally Posted by ariel

This is just like the one you yourself rejected on the Russian forum because the handle is a replacement.

1) 1) You have put a photo of the Afghan shashka. What for?

2) Artzi Yarom writes nothing about replacing the handle of the shashka. You suspect that it introduces all the confusion?

"This rare shashqa style saber is coming from Central Asia or Afghanistan. Blade 29 1/2 inches, slightly up rising, hollow ground cross section inlaid with gold decoration on both faces and on the spine. Wood grips and brass bolster. Total length 35 inches. Later wood scabbard with leather cover and chased brass grip. Very Good condition. Minor wood chips on the handle and later solder repairs on the bolsters. The attribution to Central Asia and /or Afghanistan is derived from the shape of the handle, very similar to Karud / Pesh Kabz daggers from the same area. A very rare saber".

3) If you did not accept my example, here's another example:

[mahratt]

Originally Posted by ariel

This is just like the one you yourself rejected on the Russian forum because the handle is a replacement.

By the way, it seems to me that it is better to put not only one photo where you can see the details only under a microscope. If you just put here more photo, it would be clear that in Bukhara, this shashka is not relevant.

[ariel]

Re: shashka with agate handle.
Flindt specifically states the rivets on wooden and horn handles. Agate doesn't seem to relate here.

[Gavin Nugent]

Trying to work past the school yard antics here are some facts about the rivets and hilt materials.

My sabre hilt from my gallery has already been presented above, 5 large rivets.

My turquoise pichoq set with sheaths and baldric, 2 small rivets.

The named and dated pair of pichoq shown in my gallery that interlock are two small rivets.

The large Rhino hilt Karud has 3 small rivets.

Another pichoq has five small rivets which is a lot for such a small knife.

One Mahratt now has, I think 4 or 5 small rivets from memory.

I've personally seen turquoise and silver, timber, ivory, both walrus and Elephant, jade or agate, and various horn types too.

It all comes down to the makers I am sure...for timber sabre grip slabs I only recall large rivet types, for other materials smaller iron pins...such large
rivets would look very out of place on a full silver and turquoise hilt...of those I have had, it seems timber had more rivets...it might have something to do with securing the burl like timber...to be sure to be sure, or perhaps an unknown thought process behind that aspect?

Ariel, the three rivet shashka type hilt you have presented with the engraved bolster is in my opinion Afghanistan, Herat to Kabul, influenced from the Central Asian regions further north.

Gavin

[ariel]

Gavin,
Of course the 3-riveted handle belongs to the Afghani pseudoshashka.
I showed it only for the size of the rivets, to compare with 5 small rivets on the Bukharan examples. I thought I made it clear. If not, I am sorry. Hope it is clear now.

[mahratt]

Originally Posted by Gavin Nugent

Trying to work past the school yard antics here are some facts about the rivets and hilt materials.

My sabre hilt from my gallery has already been presented above, 5 large rivets.

My turquoise pichoq set with sheaths and baldric, 2 small rivets.

The named and dated pair of pichoq shown in my gallery that interlock are two small rivets.

The large Rhino hilt Karud has 3 small rivets.

Another pichoq has five small rivets which is a lot for such a small knife.

One Mahratt now has, I think 4 or 5 small rivets from memory.

I've personally seen turquoise and silver, timber, ivory, both walrus and Elephant, jade or agate, and various horn types too.

It all comes down to the makers I am sure...for timber sabre grip slabs I only recall large rivet types, for other materials smaller iron pins...such large
rivets would look very out of place on a full silver and turquoise hilt...of those I have had, it seems timber had more rivets...it might have something to do with securing the burl like timber...to be sure to be sure, or perhaps an unknown thought process behind that aspect?

Ariel, the three rivet shashka type hilt you have presented with the engraved bolster is in my opinion Afghanistan, Herat to Kabul, influenced from the Central Asian regions further north.

Gavin

Gavin, my friend, you are saying the right thing. You and I have seen many different examples, because you and I specifically interested in Central Asia.

[mahratt]

Originally Posted by ariel

Re: shashka with agate handle.
Flindt specifically states the rivets on wooden and horn handles. Agate doesn't seem to relate here.

Now back to Bukhara shashka. Maybe you do not know that there Bukhara shashkas with a handle made of precious stone. Such shashka have, for example, in the collection of Henry Moser.