Indian Torador Barrel Investigation

rickystl · 16th August 2015, 07:32 PM

Quote:

Originally Posted by Pukka Bundook

Rick,

For cleaning, water and likely a wool mop attached to a rod would work. Wool would compress to enter the chamber, and fluff out again to fill it.
When dry, an oiled wool mop would work to prevent rust.

As you say, patches would be asking for trouble!

Hi Richard.
Yes, similar to a shotgun cleaning mop. Assuming the mop would expand enough. I'll test hat out once the breech is open.
Rick.

Pukka Bundook · 16th August 2015, 07:56 PM

You can make your own wool mop with raw wool and as big and fuzzy as needs be, Rick.

rickystl · 16th August 2015, 08:01 PM

Yes, that's a good idea. Thanks.

rickystl · 18th October 2015, 06:23 PM

BUMP!!
Hello all. I received the barrel back from the gunsmith with the breech plug drilled out. I have a few photos, so I'll start a new Thread as Part-2. The findings are most interesting.
Rick.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

16th August 2015, 07:56 PM	#2
Pukka Bundook Member Join Date: Jan 2007 Posts: 803	You can make your own wool mop with raw wool and as big and fuzzy as needs be, Rick.

16th August 2015, 08:01 PM	#3
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,633	Yes, that's a good idea. Thanks.

18th October 2015, 06:23 PM	#4
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,633	BUMP!! Hello all. I received the barrel back from the gunsmith with the breech plug drilled out. I have a few photos, so I'll start a new Thread as Part-2. The findings are most interesting. Rick.