TWO MATCHLOCK MUSKETS for ID and COMMENT

[rickystl]

Hi Stu. Thanks so much for the pics !!! First time I've ever seen the breech area on these barrels. Ok. I see the stud for the pin that holds the breach area of the barrel to the stock. That makes sense. Yes, there does not appear to be a breech plug, as we usually refer to one. Looks like some type of iron is added to the breech end and then hammer or forge welded closed. Very unusual. I gu was this was done to eliminate the need for threads. But it looks like the hole in the breech is larger than the bore diameter, which would confirm my theory of the powder chamber. What do you think? Nice to see the brass decoration on the barrel after cleaning. What a surprise.
Well, I'm still on limited correspondence. They are rebuilding the new server computer at work today. So I won't be able to post additional pics of the Jazail o r another gun till Saturday. Again, thank you so much for these barrel pics. I have take the barrel off mine to see if it was built similar. Rick.

[kahnjar1]

Originally Posted by rickystl

Hi Stu. Thanks so much for the pics !!! First time I've ever seen the breech area on these barrels. Ok. I see the stud for the pin that holds the breach area of the barrel to the stock. That makes sense. Yes, there does not appear to be a breech plug, as we usually refer to one. Looks like some type of iron is added to the breech end and then hammer or forge welded closed. Very unusual. I gu was this was done to eliminate the need for threads. But it looks like the hole in the breech is larger than the bore diameter, which would confirm my theory of the powder chamber. What do you think? Nice to see the brass decoration on the barrel after cleaning. What a surprise.
Well, I'm still on limited correspondence. They are rebuilding the new server computer at work today. So I won't be able to post additional pics of the Jazail o r another gun till Saturday. Again, thank you so much for these barrel pics. I have take the barrel off mine to see if it was built similar. Rick.

As stated before, I have extreme doubts as to the existence of a "powder chamber". IF one exists how does one see that it is filled to the CORRECT level?? On pistols with turnoff barrels one can see how full the chamber is...........
Stu

[Albert]

In the book Indian and Oriental Arms and Armour by Lord Egerton of Tatton, is a nice plate with a number of Toradars.
I will see if I can post it.

[kahnjar1]

Originally Posted by Albert

In the book Indian and Oriental Arms and Armour by Lord Egerton of Tatton, is a nice plate with a number of Toradars.
I will see if I can post it.

Hi Albert,
I have that book and agree...nice pic in Egerton's book. There are other books also with nice pics of Toradors amongst other types. Tirri's ISLAMIC WEAPONS and Elgood's FIREARMS OF THE ISLAMIC WORLD to name a couple.
Stu

[JamesKelly]

I suppose you have cleaned off the steel parts as much as you are going to.

If you intend to do more, might I suggest bronze wool along with automotive automatic transmission fluid?

Well, your favorite oil may be OK.

ATF is a cleaner, also. Let it soak for a few days.

[kahnjar1]

Originally Posted by JamesKelly

I suppose you have cleaned off the steel parts as much as you are going to.

If you intend to do more, might I suggest bronze wool along with automotive automatic transmission fluid?

Well, your favorite oil may be OK.

ATF is a cleaner, also. Let it soak for a few days.

Hi James,
Thanks for your suggestion. I have (I think) cleaned the steel/iron as far as I want to go without losing the patina. I had not thought of auto transmission fluid as a "solvent" but a good idea. I will try that on the other gun when I get to it.
I ALWAYS use brass/bronze brushes as they are of course softer metal than steel and do not scratch.
Stu

[BANDOOK]

HI MEMBERS HOW DO ALL OF YOU DISPLAY YOUR MUSKETS??
EVERY PROUD OWNER WOULD LIKE TO DISPLAY THEIRS ON THE WALL ,SO CAN SEE THEM REGULARLY ,SOME OF THE GUN HANGERS ARE EXPENSIVE ,ANY SUGGESTIONS
STU HOW DO YOU DISPLAY YOUR COLLECTION OF GUNS,CHEERS RAJESH
SOME OF MY GUNS DISPLAYED ON THE WALL,ANY SUGGESTIONS FOR DISPLAYING OTTOMON PISTOLS
REGARDS RAJESH

[rickystl]

Originally Posted by kahnjar1

As stated before, I have extreme doubts as to the existence of a "powder chamber". IF one exists how does one see that it is filled to the CORRECT level?? On pistols with turnoff barrels one can see how full the chamber is...........
Stu

Hi Stu. I'm finally back home and the computer is fixed. LOL Thanks for your PM correspondence.
OH! I so hope you are right that there is NOT a powder chamber. As you mention, it would be difficult to know how much powder to use. You would want to make sure the chamber is full. Otherwise the load could end up a bore obstruction. Maybe all of the larger breech area just contains the iron filler up to where the actual bore size begins? Hmmm.. But I think I know how to find out for sure. I'll use my tiny bore light with a wire and run it down to the end of the barrel and view. I have wood ramrods/cleaning rods that are 57" long and various sizes of cleaning jags. So I will run the rod down the barrel as far as it will go and measure the length of the inside of the bore versus the outside length of the barrel. This should tell me the amount of FILL there is in the breech length. Then I'll slowly run a snug cleaning patch down the barrel to see if the resistance is the same for the entire length. Or will the patch become loose at the breech end. I'll report back this weekend. Rick.

[kahnjar1]

Sadly not to be a shooter, but will look real nice on display. The bore is too pitted to risk firing, and I do not believe in sleeving unless the gun is to be used in competitive shooting. Anyway there are good modern made replicas for this purpose.......
I have not at this stage made a pan cover, but that will come in time.
Comments welcome.
Stu

[BANDOOK]

HI STU PLEASE CAN YOU PUT UP CLEAR PICTURES OF YOUR HOOKS WITHOUT THE GUNS AS I CANNOT MAKE OUT,IF YOU CAN EVEN JUST PUT UP THE HOOKS YOU USE IT WILL BE GREAT,CHEERS

[rickystl]

Originally Posted by kahnjar1

Sadly not to be a shooter, but will look real nice on display. The bore is too pitted to risk firing, and I do not believe in sleeving unless the gun is to be used in competitive shooting. Anyway there are good modern made replicas for this purpose.......
I have not at this stage made a pan cover, but that will come in time.
Comments welcome.
Stu

Hi Stu.
Well, that gun cleaned up really nice! Good job! And finding the brass decoration on the barrel is a bonus. Sometimes we never know whats under all the crud till we clean it. LOL. Should display well in your collection.
The pan cover is missing on mine also. Seems that most of them are on these guns. I too plan on having one made. Here are a couple of pics of original pan covers in case you're interested. Rick.

[kahnjar1]

Hi Rick,
Thanks for your kind comments re the clean up. As you say it's a great surprise to find nice bits under the crud. #2 also has some barrel brass work visible, and this time all the barrel bands are also brass. On #1 only the bands at each end are brass with the three middle bands being iron.
Thanks for the pan cover pics. Seems these bits easily fall off or maybe they are removed by the owner so as to facilitate fast shooting. Nothing would be more embarrassing (or fatal) than to pull the trigger on a closed pan! Still they are real easy to make...just some careful shaping to fit the pan.
Stu

[Albert]

For the forumites who don't have the Egerton book.