The Khukri - Myth or Fact ?

spiral · 18th December 2012, 07:53 PM

Thanks Fearn interesting,,,A fascinating read.

As the auther says though....

"I did not use real values for the geometry. I used generic structural steel material properties and did not account for the variation in modulus from the differential heat treatment or hardening. I did not check for mesh convergence, or verify my results were in accordance with the beam equations. I did not apply realistic loading conditions. In other words, please take these results with a grain of salt!"

As many of those factors are critical in the design & forging of kukris I think his advice to take with a grain of salt is correct.

But Many good points raised especialy re. reduction in transmited shock & vibration I think. I hadnt considered that before. I am sure thats a valuable hypothisis.

Spiral

18th December 2012, 07:53 PM	#14
spiral Member Join Date: Dec 2004 Posts: 1,712	Thanks Fearn interesting,,,A fascinating read. As the auther says though.... "I did not use real values for the geometry. I used generic structural steel material properties and did not account for the variation in modulus from the differential heat treatment or hardening. I did not check for mesh convergence, or verify my results were in accordance with the beam equations. I did not apply realistic loading conditions. In other words, please take these results with a grain of salt!" As many of those factors are critical in the design & forging of kukris I think his advice to take with a grain of salt is correct. But Many good points raised especialy re. reduction in transmited shock & vibration I think. I hadnt considered that before. I am sure thats a valuable hypothisis. Spiral