New member, request for info.

GIO · 25th January 2011, 06:18 PM

It is my opinion too that the hilt must be removed before cleaning the blade.
I always clean also the peksi (tang) to prevent an over - rusting, and remove the gangia to eliminate rust which forms between the gangia and the upper part of the blade. At the end I apply, on the tang only, an anti-rust varnish.
To conclude, considering the condition of the blade, I am afraid the pinapple juce will not do so much (but I never tried this method) I normally use either elecrolitic cleaning or bio-deruster. In some cases, but with great care, also a solution of phosforic acid.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

25th January 2011, 06:18 PM	#10
GIO Member Join Date: Dec 2009 Posts: 329	It is my opinion too that the hilt must be removed before cleaning the blade. I always clean also the peksi (tang) to prevent an over - rusting, and remove the gangia to eliminate rust which forms between the gangia and the upper part of the blade. At the end I apply, on the tang only, an anti-rust varnish. To conclude, considering the condition of the blade, I am afraid the pinapple juce will not do so much (but I never tried this method) I normally use either elecrolitic cleaning or bio-deruster. In some cases, but with great care, also a solution of phosforic acid.