Sikin with azimat and patterned blade

Bill M · 8th September 2008, 02:30 PM

Blade 20.5", Overall length 28",, horn handle

The designs on the scabbard are quite difficult to photograph. The patination almost obscures them. the images you see have been considerably lightened.

Henk · 8th September 2008, 07:11 PM

Beautiful Sikin. Awsome blade.

Nice pattern on the scabbard. The more dark scabbards are very difficult to photgraph. Especially when they become as dark as the ink (I think it is ink) used in the engraving.

Dajak · 8th September 2008, 08:24 PM

Hi All no it is not ink they use they burn kemierie nuts and rub them over the carving .

Same like they use with carving Lontar leaves .

Ben

Maurice · 8th September 2008, 10:24 PM

VERY NNNIIIICCCCEEE!!!!

Bill M · 8th September 2008, 10:29 PM

Thanks for the input, guys. I have been wanting one of these with the scabbard "drawings" for a while." The blade is a plus. Have not seen any with a patterned blade.

The drawings are so hard to photograph that I had to see this one in person before working out a trade,

Gonzalo G · 9th September 2008, 11:38 PM

Bill, this is a very interesting and beatiful piece. I have a very little knowledge, if any, of the malayan-indonesian-phillipinean and South East Asia weapons, but I like them very much and I would like to learn more about them. Can you tell me which is the maximum thicknes of the back at it´s base and the widht of the blade? Is the tang riveted inside the "jaws" of the handle but at plain sight? Thank you very much for your attention.
Regards

Gonzalo

Bill M · 10th September 2008, 01:00 AM

Quote:

Originally Posted by Gonzalo G

Bill, this is a very interesting and beautiful piece. I have a very little knowledge, if any, of the Malayan-Indonesian-phillipinean and South East Asia weapons, but I like them very much and I would like to learn more about them. Can you tell me which is the maximum thickness of the back at it´s base and the width of the blade? Is the tang riveted inside the "jaws" of the handle but at plain sight? Thank you very much for your attention.
Regards

Gonzalo

Hi Gonzalo,

The blade is about 1 3/8" inch (35mm) wide at the handle and about 3/16" inch (4.76mm) thick.

The tang is not riveted. It appears to be glued, perhaps some kind of tree resin. I would assume it is held in place like the Moro weapons.

8th September 2008, 02:30 PM	#1
Bill M Member Join Date: Mar 2005 Location: USA Georgia Posts: 1,599	Sikin with azimat and patterned blade Blade 20.5", Overall length 28",, horn handle The designs on the scabbard are quite difficult to photograph. The patination almost obscures them. the images you see have been considerably lightened. Attached Images

8th September 2008, 07:11 PM	#2
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	Beautiful Sikin. Awsome blade. Nice pattern on the scabbard. The more dark scabbards are very difficult to photgraph. Especially when they become as dark as the ink (I think it is ink) used in the engraving.

8th September 2008, 08:24 PM	#3
Dajak Member Join Date: Dec 2004 Posts: 951	Hi All no it is not ink they use they burn kemierie nuts and rub them over the carving . Same like they use with carving Lontar leaves . Ben

8th September 2008, 10:24 PM	#4
Maurice Member Join Date: Jan 2007 Location: The Netherlands Posts: 1,462	VERY NNNIIIICCCCEEE!!!!

8th September 2008, 10:29 PM	#5
Bill M Member Join Date: Mar 2005 Location: USA Georgia Posts: 1,599	Thanks for the input, guys. I have been wanting one of these with the scabbard "drawings" for a while." The blade is a plus. Have not seen any with a patterned blade. The drawings are so hard to photograph that I had to see this one in person before working out a trade,

9th September 2008, 11:38 PM	#6
Gonzalo G Member Join Date: Apr 2007 Location: Nothern Mexico Posts: 458	Bill, this is a very interesting and beatiful piece. I have a very little knowledge, if any, of the malayan-indonesian-phillipinean and South East Asia weapons, but I like them very much and I would like to learn more about them. Can you tell me which is the maximum thicknes of the back at it´s base and the widht of the blade? Is the tang riveted inside the "jaws" of the handle but at plain sight? Thank you very much for your attention. Regards Gonzalo