Afghan Pulourar Sabre/Scabbard Upgrade

rickystl · 23rd May 2020, 05:42 PM

It's hard to believe that seven years have passed by already since I first posted this sabre here on the Forum. Here is the Link to my original Thread for background:

http://www.vikingsword.com/vb/showthread.php?t=17016

Recently I had the sabre out looking and twirling it around and noticed the blade had become just a tad loose from the hilt. Nothing real noticeable, but loose none the less. It's just one of those things that buggs some of us. LOL
So I sent the sabre and scabbard to fellow Forum member and restorer Philip Tom to tighten the grip. Which he accomplished admirably.

But I'm sure glad I sent the scabbard along too. I knew the thin, black velvet material covering the scabbard was a later addition. But it turned out it was a MUCH later addition. And quite flimsy. So Philip offered to recover the scabbard with some grained Moroccan leather he had on hand. Of course I quickly agreed. With the black velvet material being such a late addition I had nothing to loose. While removing the velvet it was found to have a backyard type repair to the wood using some type of news/magazine paper wrapped around - that still showed advertising. LOL Hilarious !!! Also, the chape was fitted about 1-1 1/2" longer than necessary. So the wood scabbard was properly repaired and the chape moved inward a bit offering a more balanced look. The sling rings were loose, so Philip shimmed them nice and snug.
I received the sabre back last Monday. At first view I couldn't believe my eyes. WOW!!! Philip gave the leather covering an antique finish, with little scuffs here and there. You would almost swear the leather was original to the scabbard. Even smells like old leather. LOL The scabbard is and looks so much better. I could not be happier with the results. THANK YOU PHILIP !! Pictures just don't seem to do justice to the leather covering. But here are some anyway....

I thought I saved the two pics of the paper wrapped wood that Philip sent me, but can't seem to locate them. Hopefully Philip will chime in and has the two pics he sent me. It's so funny.

Thanks again Philip for such a masterful job.

Rick

rickystl · 23rd May 2020, 05:43 PM

THREE MORE PICS......

kahnjar1 · 23rd May 2020, 10:52 PM

Great job on that scabbard IMHO. The aging looks wonderful.
Stu

Kubur · 24th May 2020, 09:33 AM

Yes, it's a top quality work.

Ian · 24th May 2020, 10:47 AM

Yes, Philip does some excellent work. I'm hoping he will tell us more about the leather and where it came from. I suspect it is quite old and is recycled from something unrelated to weapons.

mariusgmioc · 24th May 2020, 12:47 PM

Hello Rick,

I opened your message, just looked at the pictures and thought: what a beautiful Afghan pulowar complete with original scabbard...

Then I read your comment and realised that to my surprise, the scabbard was restored...

But wow, it is so well done that I wouldn't have guessed in a thousand years it was restored.

Philip is a real artist!

Philip · 25th May 2020, 01:28 AM

Quote:

Originally Posted by Ian

Yes, Philip does some excellent work. I'm hoping he will tell us more about the leather and where it came from. I suspect it is quite old and is recycled from something unrelated to weapons.

Thanks, Ian. I like to use salvaged antique material whenever possible ,but often, it is not dimensionally compatible with the project (especially when applied to a curved slender object with a considerable expanse of material required between fittings. There are other issues as well -- fragility, and old crease lines on the salvaged stock that would be incongruous on the thing to be re-covered.

I used to e able to get some wonderful morocco-grained goat leather that was an excellent match for old shagreen as re texture, and it came in black and dark green which was perfect for virtually all Near Eastern and Chinese scabbard jobs. But the importer quit handling it. On this pulouar, I had some similar stuff that I got from a supplier that provides materials for restorers of vintage and antique cameras and optical equipment -- binocs, spyglasses, and their cases. It's thin and the surface is hard to the touch, like the originals. The downside is that it has virtually no "stretch" to it, unlike the goat I used to use previously, so forming it around a curved sheat can be tricky if you want to avoid wrinkles. But I have ways to address that and it "distresses" very well for a nice antique effect.

23rd May 2020, 05:42 PM	#1
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,633	Afghan Pulourar Sabre/Scabbard Upgrade It's hard to believe that seven years have passed by already since I first posted this sabre here on the Forum. Here is the Link to my original Thread for background: http://www.vikingsword.com/vb/showthread.php?t=17016 Recently I had the sabre out looking and twirling it around and noticed the blade had become just a tad loose from the hilt. Nothing real noticeable, but loose none the less. It's just one of those things that buggs some of us. LOL So I sent the sabre and scabbard to fellow Forum member and restorer Philip Tom to tighten the grip. Which he accomplished admirably. But I'm sure glad I sent the scabbard along too. I knew the thin, black velvet material covering the scabbard was a later addition. But it turned out it was a MUCH later addition. And quite flimsy. So Philip offered to recover the scabbard with some grained Moroccan leather he had on hand. Of course I quickly agreed. With the black velvet material being such a late addition I had nothing to loose. While removing the velvet it was found to have a backyard type repair to the wood using some type of news/magazine paper wrapped around - that still showed advertising. LOL Hilarious !!! Also, the chape was fitted about 1-1 1/2" longer than necessary. So the wood scabbard was properly repaired and the chape moved inward a bit offering a more balanced look. The sling rings were loose, so Philip shimmed them nice and snug. I received the sabre back last Monday. At first view I couldn't believe my eyes. WOW!!! Philip gave the leather covering an antique finish, with little scuffs here and there. You would almost swear the leather was original to the scabbard. Even smells like old leather. LOL The scabbard is and looks so much better. I could not be happier with the results. THANK YOU PHILIP !! Pictures just don't seem to do justice to the leather covering. But here are some anyway.... I thought I saved the two pics of the paper wrapped wood that Philip sent me, but can't seem to locate them. Hopefully Philip will chime in and has the two pics he sent me. It's so funny. Thanks again Philip for such a masterful job. Rick Attached Images

23rd May 2020, 05:43 PM	#2
rickystl Member Join Date: Jul 2010 Location: St. Louis, MO area. Posts: 1,633	THREE MORE PICS...... Attached Images

23rd May 2020, 10:52 PM	#3
kahnjar1 Member Join Date: Aug 2007 Location: CHRISTCHURCH NEW ZEALAND Posts: 2,811	Great job on that scabbard IMHO. The aging looks wonderful. Stu

24th May 2020, 09:33 AM	#4
Kubur Member Join Date: Jun 2013 Posts: 2,145	Yes, it's a top quality work.

24th May 2020, 10:47 AM	#5
Ian Vikingsword Staff Join Date: Dec 2004 Location: The Aussie Bush Posts: 4,522	Yes, Philip does some excellent work. I'm hoping he will tell us more about the leather and where it came from. I suspect it is quite old and is recycled from something unrelated to weapons.

24th May 2020, 12:47 PM	#6
mariusgmioc Member Join Date: Sep 2014 Location: Austria Posts: 1,912	Hello Rick, I opened your message, just looked at the pictures and thought: what a beautiful Afghan pulowar complete with original scabbard... Then I read your comment and realised that to my surprise, the scabbard was restored... But wow, it is so well done that I wouldn't have guessed in a thousand years it was restored. Philip is a real artist!