![]() |
|
![]() |
|
Thread Tools | Search this Thread | Display Modes |
|
![]() |
#1 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Made by Peter Hofkircher who had his workshop at the nearby town of Mürzzuschlag.
It features a part lock plate chararcertistic of the 1520s-30 though complete lock plates were widely in use by then. The stock is of either limewood or pearwood. Though having a recoil stop (hook) both its relatively small caliber of 15.7 mm and relatively light weight of 8.7 kilograms denote that is not really a wall gun but rather a long harquebus with a support hook. The overall length of the piece is 179 cm. Enjoy. Michael |
![]() |
![]() |
![]() |
#2 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
The rest.
The ramrod channel is offset because of the hook. Note the long muzzle section left characteristically unstocked. Michael |
![]() |
![]() |
![]() |
#3 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
The pic of the broad fish tail buttstock should not have been in there; instead, these should have.
Michael |
![]() |
![]() |
![]() |
#4 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Hopefully I will get to right pic this time ...
![]() |
![]() |
![]() |
![]() |
#5 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Nooo ...
![]() |
![]() |
![]() |
![]() |
#6 |
(deceased)
Join Date: Sep 2008
Location: Bavaria, Germany - the center of 15th and 16th century gunmaking
Posts: 4,310
|
![]()
Done at last ...
![]() |
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|