10th March 2023, 09:39 AM | #1 |
Member
Join Date: Sep 2005
Location: Singapore
Posts: 340
|
Loose scabbard bands
One of the more common minor issues we face, I would be interested in hearing about different approaches for securing loose scabbard bands.
|
10th March 2023, 11:55 AM | #2 |
Member
Join Date: Apr 2005
Posts: 3,254
|
Hello Jeff,
Usually this is due to the wood shrinking in dry environments. Aside from finding a good balance regarding air humidity (always a compromise between metals and organic materials) and avoiding temperature & humidity fluctuations, I first make sure that the wood is well oiled (at least if not varnished with any natural resin like shellac): Repeat multiple applications over a longer period; make sure though to always thoroughly wipe off excess oil after each application and be careful that the oil does not reach any glued parts/surfaces. Take pics of the marks on the wood to ascertain correct position later. If nurturing the wood does not help, check whether the bands are placed correctly (kinda obvious - these often get mixed up though!). Then a close examination of the construction may lead to a remediation approach. However, I prefer to keep the bands as is. If one really needs to secure them, I'd go for any fully reversible option like wax or a tiny drop of certain elastic glues. Regards, Kai |
10th March 2023, 02:43 PM | #3 |
Member
Join Date: Dec 2004
Location: What is still UK
Posts: 5,806
|
I good solution to this type of problem is, mucilage glue, especially for organic materials. Being completely harmless reversable.
|
10th March 2023, 05:07 PM | #4 |
Member
Join Date: Aug 2007
Location: Germany, Dortmund
Posts: 8,761
|
I also don't be afraid to fix them with a drop or two glue in position.
|
11th March 2023, 10:54 AM | #5 |
Member
Join Date: May 2021
Location: Germany
Posts: 43
|
I also prefer two drops of glue. It should be water soluble and acid free. (starch glue or methyl cellulose)
|
|
|