View Single Post
Old 10th February 2019, 03:01 AM   #22
RobT
Member
 
RobT's Avatar
 
Join Date: Mar 2005
Posts: 452
Default Check for Continuity

Hi kai,
Before resorting to an x-ray as kronckew suggested, you might want to check for continuity first. Attach a wire lead to the blade and to one of the poles of a D cell. Attach another lead to the other D cell pole and to the suspected tang. Then touch the blade and the suspected tang with a circuit tester. If the circuit tester doesn't light, there is no continuity and you don't have to go any further. If there is continuity, then the piece on the pommel is either the tang or it is a metal pin that is in contact with the tang so an x-ray would then be necessary to determine which is which.

Sincerely,
RobT
RobT is offline   Reply With Quote