View Single Post
Old 20th October 2008, 07:32 PM   #10
fernando
Lead Moderator European Armoury
 
fernando's Avatar
 
Join Date: Dec 2004
Location: Portugal
Posts: 9,620
Default

Quote:
Originally Posted by Ed
I think that the shearing force of the recoil would break off the hook unless it was heavily reinforced. Of course, a metal hook is simly a reinforced wooden one without the wood.
Sorry for my ignorance but ... what am i missing here?
Don't i see that the Berne Harquebus has the hook peened through the stock ?
On the other hand, isn't the system of casting the hook to the barrel a 'third generation' development ?
If i well understand, in the first step the gun had a gunstock with a wooden shoulder on the underside, as shown in a specimen in the museum of Pilsen, which dates to around 1400.
But as this design involved severe stress to the wood, which did not withstand the strain for long, the next step was the development of an iron hook with bands or nails being fitted to the shaft, further improved by positioning the hook on the barrel with a band and securing it in the shaft with a cross pin.
It was only after this that, the hook was either forged directly on to the barrel or cast with it, when of bronze.
This is the way i understood an article written by Bernhard Rietsche, in his work Meine gotischen Handfeuerrohre (page 47), which was gently passed to me by a notable person in this Forum .
However i know i don't have the minimum preparation to discuss this subject, so i beg you to correct me if or where i am wrong .
Fernando
fernando is offline   Reply With Quote