Ethnographic Arms & Armour - View Single Post - 15th century short wrought iron barrels

Matchlock · 14th March 2014, 12:06 PM

Similar samples in which older barrels are united are two 16th-17th c. Pechlanzen (pitch lances) in the Emden Armory.
The pitch incendiary mass was set afire and the lance was hurled by some sort of a catapult onto the shingled roofs of a besieged town where the delicate iron arrowheads got stuck, and the blazing tar/pitch would splatter around. Additionally, the short barrels are barbed for better contact with the roof shingles.
The saucer-like wooden plate at the bottom was meant to direct the splashing fire right onto the roof.

The measurements are:
overall length 2.25 m
width of the tar saucer 21 cm
weight 3.2 kg

I took these photos in 1987.

m

14th March 2014, 12:06 PM	#28
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	Similar samples in which older barrels are united are two 16th-17th c. Pechlanzen (pitch lances) in the Emden Armory. The pitch incendiary mass was set afire and the lance was hurled by some sort of a catapult onto the shingled roofs of a besieged town where the delicate iron arrowheads got stuck, and the blazing tar/pitch would splatter around. Additionally, the short barrels are barbed for better contact with the roof shingles. The saucer-like wooden plate at the bottom was meant to direct the splashing fire right onto the roof. The measurements are: overall length 2.25 m width of the tar saucer 21 cm weight 3.2 kg I took these photos in 1987. m Attached Images Last edited by Matchlock; 14th March 2014 at 05:46 PM.