I am adding any informations, which I have discovered
Information are from sources of the Stockholm Historiska Museet (SHM) and from personel communication with mrs Charlotte Hedenstierna Jonson , 1:e antikvarie - Senior Curator of SHM
http://mis.historiska.se/mis/sok/bild.asp?uid=20997
http://mis.historiska.se/mis/sok/invnr.asp?invnr=19734
Blade
Blade is preserved fragmentary, see pic. 1. There are no traces of pattern welding on the blade. But the condition of the blade is however quite poor and it is difficult to determine any original structure.
Pic. 1 fragments of sword
Dimensions
assumed from SHM
Whole lenght 102cm
Lenght of the lower guard 105 mm
Lenght of the uppre guard 90 mm
Lenght of whole hilt 171 mm
Width od blade 65 mm
Thickness of lower guard 26mm
Thickness of upper guard 30mm
Individual dimensions are in right proportions
Calculated dimensions
As a reference was a lenght of the lower guard. See pic 2 and 3, which are in scale 1:1.
http://livinghistory.cz/~sidney/Zbra...redu%201_1.jpg
Pic. 2 anteroposterior wiev, scale 1:1
http://livinghistory.cz/~sidney/Zbra...boku%201_1.jpg
Pic 3 lateral wiev, scale 1:1
Height of lower guard 21mm
Height of pommel 33mm
Width of the foot of pommel 79mm
Thickness of the foot of pommel 28mm
Height of upper guard 21-22mm
Width of the handle in the lower part 30mm, in the upper part 19mm
Lenght of handle 90mm
Thickness of the handle in the upper part 3mm, in the middle 4mm
Shape
See pic 2,3,4,5,6,7 different wievs of the sword.
http://livinghistory.cz/~sidney/Zbra...arevny%201.jpg
Pic 4 Color wiev of sword
http://livinghistory.cz/~sidney/Zbra...arevny%202.jpg
Pic. 5 Another color wiev
http://livinghistory.cz/~sidney/Zbra...arevny%203.jpg
Pic. 6 Another color wiev
http://livinghistory.cz/~sidney/Zbra...d%20CB%205.jpg
Pic 7 Blackandwhite wiev
Sword type H
Both guards have quite pointed ends. According to pic 3, the faces of guards are ligth convex.
From below are visible rivets fastening pammel to upper guard. Between pommel and upper guard is visible notch wide about 2mm, see pic 8. Pommel sharply taper to a point in anteroposterior wiev, in lateral wiev is curvature convex. Edge of pommel is not sharp, but with narrow facet about 3mm wide, see pic 14. Lower and upper guard are continously eliptic with pointed ends, see pic. 7a.
http://livinghistory.cz/~sidney/Zbra...%20zespodu.jpg
Pic. 7a Wiev from below
http://livinghistory.cz/~sidney/Zbra...%20hlavice.jpg
Pic 8 Detail of pommel and notch between pommel and upper guard
http://livinghistory.cz/~sidney/Zbra...vice%201_1.jpg
Pic. 9 Pommel in scale 1:1
http://livinghistory.cz/~sidney/Zbra...ice%202xzv.jpg
Pic.10 Pommel in scale 2:1.
http://livinghistory.cz/~sidney/Zbra...%204x%20zv.jpg
Pic. 11 Pommel in scale 4:1.
http://livinghistory.cz/~sidney/Zbra...tity%201_1.jpg
Pic. 12 Lower guard in scale 1:1
Decoration
All faces are adorned with tausiert decoration from interlacing lozenges from red and white metal. Width of lozenges are 6-7mm, height also 6-7mm, and width of connecting strips are about 1-2mm.
There are four rectangular dots in every lozenges, in the picture 13 are highlighted by yellow dots.
Edge of pommel is adorned by narrow lines in shape of letter V from red and white metal. Width of this strips is about 0,75mm, see pic 14, where are in scale 4:1 .
Special is executed passage of decoration to ends of guards see pic. 8, 11 and 15.
Decoration of the upper and lower faces of the upper and lower guard is formed by plating with the yelow metal, see pic. 7a.
http://livinghistory.cz/~sidney/Zbra...ny%20bronz.jpg
Pic. 13 Pommel with highlited dotes
http://livinghistory.cz/~sidney/Zbra...oku%204xzv.jpg
Obr. 14 Wiev of decoration of pommel from side, scale 4:1
http://livinghistory.cz/~sidney/Zbra...%202x%20zv.jpg
Obr. 15 Detail of the adornment of the lower guard in scale of 2:1
Material of decoration according to SHM, white metal is certainly silver, red metal is copper. Today visible copper is only foundation for ultimate surface created by golden copper alloy. Pure copper was not visible at all. Traces of golden copper alloy are visible on the faces of the pommel and guards see pic. 4 and 11. Upper and lower faces of the upper and lower guard are also plated probabaly by the same golden copper alloy see pic. 7a.
Dots lying in every lozenges were probably from another colour copper alloy than the rest of the hilt. Most of the rectangular dots however show the underlying reddish copper. Nevertheless, as for the materials of the decoration of the hilt it is difficult to determine the contents without a SEM analysis.
The groove between pommel and upper guard / see pic. 8/ indicates that there possibly has been a braid or twisted wire between the upper guard and the pommel but there are no visible remains. For example you could see pic. 16, 17, and wider one in 19.
http://livinghistory.cz/~sidney/Zbra...%20zdobeni.jpg
Pic. 16 Sword from Novgorod with copper alloy plating and twisted wire in notch between pommel and upper guard
http://livinghistory.cz/~sidney/Zbra...eny%20drat.jpg
Pic. 17 Sword from Kilmainheim with twisted wire decoration in this notch
http://livinghistory.cz/~sidney/Zbra...m%20dratem.jpg
Pic 18 Another example of wire braid in this notch