Ethnographic Arms & Armour - View Single Post

Matchlock · 5th June 2010, 02:39 AM

Hi SuperManuel

,

As to my experience, those medieval multibarrel constructions nomally did not employ barrels with rear extensions as they mostly were fixed to a common wooden construction by iron bands. In my collection though there is a short round iron barrel with a short iron tail, ca. 1450 to 1500, the latter bent downwards and, together with an iron ring over the fore end, being fixed to a solid flat oaken base by the means of three crude square nuts. The rear end of the 'stock' is equipped with an iron ring so it most probably was used as kind of a niche gun (German Nischengeschütz) chained to a niche in the wall inside a castle and kept ready and primed for some special moment. As long as it was aimed in the direction of the gate and the powder in the touch hole was sealed e.g. with wax, it could be kept there for years and fired in a jiffy by using a red hot igniting iron or smoldering match.

A 4 cm bore barrel - wow! that sure leaves a hard impression!

You are certainly right; the black gun powder of 500 to 600 years ago neither had the optimal mixture of today's black powder - let alone the modern nitro powder - nor did it come near the latter's kicks. Remember that the medieval black powder was of very fine meal structure until the grained powder was invented in the 16th century.

Best-est wishes, too

Mike

5th June 2010, 02:39 AM	#9
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	Hi SuperManuel , As to my experience, those medieval multibarrel constructions nomally did not employ barrels with rear extensions as they mostly were fixed to a common wooden construction by iron bands. In my collection though there is a short round iron barrel with a short iron tail, ca. 1450 to 1500, the latter bent downwards and, together with an iron ring over the fore end, being fixed to a solid flat oaken base by the means of three crude square nuts. The rear end of the 'stock' is equipped with an iron ring so it most probably was used as kind of a niche gun (German Nischengeschütz) chained to a niche in the wall inside a castle and kept ready and primed for some special moment. As long as it was aimed in the direction of the gate and the powder in the touch hole was sealed e.g. with wax, it could be kept there for years and fired in a jiffy by using a red hot igniting iron or smoldering match. A 4 cm bore barrel - wow! that sure leaves a hard impression! You are certainly right; the black gun powder of 500 to 600 years ago neither had the optimal mixture of today's black powder - let alone the modern nitro powder - nor did it come near the latter's kicks. Remember that the medieval black powder was of very fine meal structure until the grained powder was invented in the 16th century. Best-est wishes, too Mike Attached Images Last edited by Matchlock; 5th June 2010 at 05:25 AM.