Filipino blade - what do I have here?
Hello forumites!
This piece got me stumped:
Blade with single bevel on the right hand side (left side flat except for a tiny bit of edge wear) - not with a broad chisel grind as in most Visayan blades though; full tang construction consistent with Luzon (influence).
The horn hilt nicely carved with silver ferrule and silver pommel cap (both octagonal); tang peened over a brass disk; copper pin visible on both sides near ferrule (possibly securing the blade?).
I seem to remember blades of similar profile being attributed to Bicol...
Thanks for any comments/pointers!
Regards,
Kai
--
Specs:
sword length 564 mm (22.2")
blade length 421 mm (16.6")
max. blade width 39.3 mm (1.55"); at base max. 30.2 mm and min. 25.8 mm (1.19"/1.02")
blade thickness: at base 5.85 mm (0.23"); 1/3rd 3.9 mm (0.15"); 2/3rd 3.3 mm (0.13")
weight 504 g (1 lb 1.8 oz)
POB 90 mm (= 331 mm from tip)
--
Last edited by kai; 1st February 2019 at 06:58 AM.
|