Ethnographic Arms & Armour - View Single Post

Lee · 24th February 2023, 07:04 PM

Detlef, thank you, I think the mountings of all of them are silver alloys. I suspect the top one in the second post will be the least fine. The middle knife in post #2 above (with the gold initials on the sheath) is marked on the hilt and clip with either '900' or '800', but the punch is so tiny that I cannot be sure even using a jeweler's loupe. That knife is also marked 'ADRIAN' on the clip.

The one I previously presented, marked 'Napoleon III', tested an average of 72% silver for the mounts by XRF with a few percent variation between readings, with its suspected Solingen steel blade having 0.64% Manganese followed by 0.62% Silicon.

24th February 2023, 07:04 PM	#5
Lee EAAF Staff Join Date: Nov 2004 Location: Upstate New York, USA Posts: 894	Detlef, thank you, I think the mountings of all of them are silver alloys. I suspect the top one in the second post will be the least fine. The middle knife in post #2 above (with the gold initials on the sheath) is marked on the hilt and clip with either '900' or '800', but the punch is so tiny that I cannot be sure even using a jeweler's loupe. That knife is also marked 'ADRIAN' on the clip. The one I previously presented, marked 'Napoleon III', tested an average of 72% silver for the mounts by XRF with a few percent variation between readings, with its suspected Solingen steel blade having 0.64% Manganese followed by 0.62% Silicon.