Ethnographic Arms & Armour - View Single Post - Filipino blade

kronckew · 9th February 2019, 06:20 AM

The 'peened tang' could be just a nail used to hold the pommel piece on, as is done on many khukuri. An x-ray would confirm or deny the tang type.

More cheaply, you might get some info by using a strong super-magnet, running it along the grip to feel if it 'pulls' all the way along.

I also note that a small circular hole thru the tang along the neutral axis does not significantly weaken the blade. The neutral axis is a line where the blade & tang under load is under compressive loading above, and tensile loading below. On the line, there is essentially zero loading. It runs along the centre line on a normal rectangular section.

9th February 2019, 06:20 AM	#21
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,150	The 'peened tang' could be just a nail used to hold the pommel piece on, as is done on many khukuri. An x-ray would confirm or deny the tang type. More cheaply, you might get some info by using a strong super-magnet, running it along the grip to feel if it 'pulls' all the way along. I also note that a small circular hole thru the tang along the neutral axis does not significantly weaken the blade. The neutral axis is a line where the blade & tang under load is under compressive loading above, and tensile loading below. On the line, there is essentially zero loading. It runs along the centre line on a normal rectangular section. Last edited by kronckew; 9th February 2019 at 06:31 AM.