Ethnographic Arms & Armour - View Single Post

kronckew · 25th November 2008, 03:49 PM

it's here,

14.25 in. double edged blade, 7/8 in. wide at the guard, 0.2 in. thick (5mm.) at the 1.75 in. long brass ricasso cover - this bit fits inside the scabbard, fits equally well either way around. blade is distal tapered to a needle point. some evidence of pattern in the steel, i may try a light etch to see if there is anything.

5.5 in. brass/copper/aluminum/wood or horn (?) grip, 1.5x1x3/4 guard in brass and copper,
scabbard is heavy copper with the single rear heavy copper hinged d-ring mount.

25th November 2008, 03:49 PM	#3
kronckew Member Join Date: Mar 2006 Location: Room 101, Glos. UK Posts: 4,150	it's here, 14.25 in. double edged blade, 7/8 in. wide at the guard, 0.2 in. thick (5mm.) at the 1.75 in. long brass ricasso cover - this bit fits inside the scabbard, fits equally well either way around. blade is distal tapered to a needle point. some evidence of pattern in the steel, i may try a light etch to see if there is anything. 5.5 in. brass/copper/aluminum/wood or horn (?) grip, 1.5x1x3/4 guard in brass and copper, scabbard is heavy copper with the single rear heavy copper hinged d-ring mount.