Quote:
|
Originally Posted by katana
Looking at the hammer head....2 things spring to mind. One.... efficient hammer 'faces' are very slightly domed, these are flat, secondly, there seems to be no marks/damage indicating use as a hammer.
I too believe that these are purely for balance. Below I have marked the axe heads with the centre of the shaft hole, the edge of the hammer and the back edge of the blade. The distance from the centre line to the hammer edge and the centre line to the back edge are almost identical (in ratio)for each axe. The measurements are approx. on the picture and are only to scale (so not actual dimensions), but I hope it shows better what I mean.The maker seems to have been very exacting in ensuring 'balance'. On a long shaft this would be important as imbalance would be more exagerated as the shaft is 'lengthened'.
When I first saw these axes, I immediately thought Indian. I do not think these are utilitarian. The angle of the blade (off-set, diagonal from the shaft) would not be ideal for cutting wood etc. (better to have the blade in-line with the haft) Some carpenter axes are off-set (left or right, from the centre line) but are still in-line to the shaft.
I believe the angle of the axe blade is to ensure a good cut when it is mount on a long shaft and used from horseback.....I believe that these are IMHO saddle axes.
Kind Regards David
|
Excellent thinking!
I've been wracking my brain, as I'm sure I had an axe with an ofset angled cutting edge before. But I've had som many over the last 25+ years I can't remember which one it was!
Both of these two has that feature, although it's only slight on the other one.
Great detective work BTW
Best
Gene