Quote:
Originally Posted by Manolo
Thanks for the info!
.
1900? so they would have had access to some sort of lath to turn the pommel I imagine. They show a lot of care and craftsmanship, especially the ones with ivory.
Emanuel
|
Hi Emanuel, here is some info. I previously posted on primative lathes...I did have a picture of an African craftsman , 19 C but cant find it...
I'm wondering whether the original handles were 'turned' on a primative lathe.... you would only need something like this ... a pole lathe....easily made from local timber and cordage.... these were in common use in medievel Europe and Asia. The cord is wrapped around the 'working' piece, as the pedal is pushed down, the cord 'spins' the wood one way, The branch attached to the other end of the cord is pulled down (putting it under tension) By releasing pressure on the pedal, the branch 'springs' back pulling the cord and 'spins' the 'worked piece' in the opposite direction......then the operation is continually repeated. As the wood is spun it can be worked with a knife of chisel.....as on a 'normal' lathe.