Quote:
|
Originally Posted by David R
Today I had a go at making some cutlers resin compound to re affix the blade into my recent purchase, an Indo Persian khanjar. Not as easy at it seemed from the forums,
Various formulae perused, but all are variations on resin, beeswax and some sort of filler...charcoal, whiting, sand or fibre of various origin.
First attempt 2 parts frankincense (cheap Somali) 2 parts resin of unknown origin 1 part beeswax. Dreadfull fumes , burnt the teflon off the pan (not using a teflon lined pan again) and the dubious resin refused to melt. Experiment discarded, next attempt.
4 part cheap francincense, 1 part beeswax. Fumes, pleasant at first then noxious, bubbles and boiling but no complete melt of the resin, exp. discarded.
Lessons learned, not to use a teflon lined pan, I think that was the origin of the nastiest fumes, and check the resin is suitable. I think the first batch of unknown origin was probably a synthetic masquerading as natural, and I have my suspicions of the cheap frankincense.
I will try again sometime soon, getting this right will mean several projects can the be finished, but I might use a stove outside rather than indoors.
Any advice from people who have had success with this stuff very welcome.
|
Salaams David R ~ I hope you survived the fumigation experiment
Definitely down the garden well away from the house ya ! Rich has a good alternative there... Good luck with that...
We use a strange Glue. To fix the blade, Lakk is used (Tachardia Lacca ) from an insect secretion. Essentially it looks like small blocks/ sheets of black pitch and is imported from India and Pakistan. The molten pitch-like lakk is poured into the hilts cuff(tuq) and the heated blade is sturdily pressed home .
Regards,
Ibrahiim al Balooshi.