Quote:
|
Originally Posted by Jim McDougall
Perkun,
The gold or brass inlay dot in the blade. It seems that such dots or varying symbolic marks were often placed at strategic locations on blades in India, in the case of this sabre referring to the location at the base of the apparant step in the blade back. It is yet unclear what such symbolism may imply, but the placing does seem strategic, thus some inherent meaning is distinctly possible. Again, it does not seem to be any type of makers mark, but some sort of key symbolic application.
Jim
|
I hope this is considered relevant, but, I recently read this in "Islamic Swords and Sworgsmlths" by Dr Unsal Yucel on Page 57 while describing Umayyad and Abbasaid Swords
'The majority of these swords have somewhere between one to seven gold-filled holes, generally located on either side of the inscription and sometimes at the tip. These golded filled holes were made by riveting a piece of gold into a hole in the blade. They are usually level with the surface of the blade and approximately 5mm in diameter. It is thought that the purpose of these gold rivets was to bring good luck to the swordman'
All the best.
Jeff