Ethnographic Arms & Armour - View Single Post - Indian Torador Barrel Investigation

Philip · 20th November 2016, 02:47 AM

Hey Rick,
Thanks for sharing the pics. This thing's gonna look good when done! Can't wait to see what kind of shot groups you get at 50 and 100 yd.

I'll check your prior post about bores. This brings to mind, years ago in college I was writing a paper and consulted a translation of the Ming technical compendium TIANGONG KAIWU , which had an entry on guns and their manufacture. The text mentions something along the lines of the "belly" of the barrel being larger than the "mouth" which implies a bigger diameter towards the breech. The type of gun discussed was a fowling piece, so it seems that the author was describing a rudimentary application of the choke principle on shotguns, which didn't become common in the West until centuries later.

Say, are you proficient at shaping and tempering V-shaped leaf springs? I recently picked up a Chinese fowling piece with the Indo-Portuguese type snapping matchlock, and the large external spring broke long ago and was jerry-rigged during its working life -- it works beautifully but I want it restored to the original shape. The "root" of the spring is intact and in place, what's missing is the area almost out at the U-bend and going up to press on the serpentine. Can you fabricate and weld on the replacement section to match if I sent you the lock and a 1:1 scale shop drawing of the complete spring (it's made of steel)? If you can imagine the spring on a Japanese matchlock, this is exactly like that except for the material. If this sounds like something you can do, why not send me a PM and we can get in touch via email.

20th November 2016, 02:47 AM	#4
Philip Member Join Date: Dec 2004 Location: California Posts: 1,036	Hey Rick, Thanks for sharing the pics. This thing's gonna look good when done! Can't wait to see what kind of shot groups you get at 50 and 100 yd. I'll check your prior post about bores. This brings to mind, years ago in college I was writing a paper and consulted a translation of the Ming technical compendium TIANGONG KAIWU , which had an entry on guns and their manufacture. The text mentions something along the lines of the "belly" of the barrel being larger than the "mouth" which implies a bigger diameter towards the breech. The type of gun discussed was a fowling piece, so it seems that the author was describing a rudimentary application of the choke principle on shotguns, which didn't become common in the West until centuries later. Say, are you proficient at shaping and tempering V-shaped leaf springs? I recently picked up a Chinese fowling piece with the Indo-Portuguese type snapping matchlock, and the large external spring broke long ago and was jerry-rigged during its working life -- it works beautifully but I want it restored to the original shape. The "root" of the spring is intact and in place, what's missing is the area almost out at the U-bend and going up to press on the serpentine. Can you fabricate and weld on the replacement section to match if I sent you the lock and a 1:1 scale shop drawing of the complete spring (it's made of steel)? If you can imagine the spring on a Japanese matchlock, this is exactly like that except for the material. If this sounds like something you can do, why not send me a PM and we can get in touch via email.