Ethnographic Arms & Armour - View Single Post - Breech loading 1450-1550

Matchlock · 7th October 2009, 12:52 PM

Sadly not in my collection ...

The barrel and one (of originally a set) retained interchangeable breech cast of brass or bronze, the tiller stock a modern replacement. The Late Gothic style with its characteristically chamfered edges suggests a date of late 15th century, the gun may have been cast in a Nuremberg foundry.

The breech was designed to recieve only the measure of powder and a plug while the ball was put in the barrel from the rear before inserting the breech. Originally the breech was fitted with a priming pan and cover which are now missing. The swiveling block at the rear end of the barrel acts as a loading gate.

Length of the barrel including tiller socket: 55 cm
Barrrel length: 46.2 cm
Bore: 12 mm
Weight without stock: 1.85 kg

A 500 year old rapid firing high tech engineering piece!

Best,
Michael

7th October 2009, 12:52 PM	#49
Matchlock (deceased) Join Date: Sep 2008 Location: Bavaria, Germany - the center of 15th and 16th century gunmaking Posts: 4,310	A Unique South German Breech Loading Arquebus, ca. 1470-1500 Sadly not in my collection ... The barrel and one (of originally a set) retained interchangeable breech cast of brass or bronze, the tiller stock a modern replacement. The Late Gothic style with its characteristically chamfered edges suggests a date of late 15th century, the gun may have been cast in a Nuremberg foundry. The breech was designed to recieve only the measure of powder and a plug while the ball was put in the barrel from the rear before inserting the breech. Originally the breech was fitted with a priming pan and cover which are now missing. The swiveling block at the rear end of the barrel acts as a loading gate. Length of the barrel including tiller socket: 55 cm Barrrel length: 46.2 cm Bore: 12 mm Weight without stock: 1.85 kg A 500 year old rapid firing high tech engineering piece! Best, Michael Attached Images