View Single Post
Old 9th December 2023, 04:57 PM   #17
Jim McDougall
Arms Historian
 
Jim McDougall's Avatar
 
Join Date: Dec 2004
Location: Route 66
Posts: 9,940
Default

Thank you so much for joining us on this thread Capn! This is a fascinating example of a 'Glasgow' style basket hilt, and the thing about these kinds of examinations is that there is ALWAYS something further.

In this case, the blade, which has the distinctive mark of the crescent or half moon, which is a marking generally held to have been used by the 'espaderos del Rey' in Spain. This was typically used in conjunction with the makers own punzone, much as in the manner of silversmiths having several markings in their work, the hallmark, year and assayers mark.

Naturally, the half moon became seen as an indicator of high quality for obvious reasons, so was readily copied spuriously by German smiths, who were well known for also using well known Toledo marks and names.

While browsing through 'The Plug Bayonet" by the late R.D.C. Evans, looking through the profusely compiled plates of markings, there they were......in the British bayonet chapter.............TWO of these same almost silhouette half moon marks. Both were 17th c. of course, but unique in being pretty much solid, without 'rostrum' (the lighter inside outline), both to unidentified cutler and rare.

What I am wondering is, would it be possible that these blades might have filtered through the British networks that were importing blades out of Germany in the 17th century? In the case of my 'mortuary' which is presumed c. 1640, it also has the Solingen ANDREA FERARA with the half moon on obverse side of blade.
In this case, I feel this is most certainly a Hounslow product, but with the 'Glasgow' , a blade, curiously WITHOUT the ANDREA FERARA appears on a Scottish sword.
In this paradox, it seems it should have been reversed, as the ANDREA FERARA was of course ubiquitous on basket hilts, but notably less on English swords.

The appearance of the half moon on these plug bayonets to an unidentified cutler simply indicates the circulation of imported (or smuggled) Solingen blades for swords, and the apparent use of the same marks by cutlers working at the time.

Conundrums indeed, but all part of the joy of traveling virtually into these times hoping to find answers, if not simply perspective.

Capn, one more note, the example you have with the incredible blade by Wundes with FOUR (count em) kings heads, is plenty to add!!!

On the 'SINCLAIR' , what is most important is the part played by these basket hilt sabers, often with heart shaped piercings which correspond to those on the Glasgow form shields. The 'Sinclair' term was simply taken by Victorian writers to memorialize George Sinclair who was killed in the tragic event in Norway during the Kalmar War.
Jim McDougall is offline   Reply With Quote