Check for Continuity
Hi kai,
Before resorting to an x-ray as kronckew suggested, you might want to check for continuity first. Attach a wire lead to the blade and to one of the poles of a D cell. Attach another lead to the other D cell pole and to the suspected tang. Then touch the blade and the suspected tang with a circuit tester. If the circuit tester doesn't light, there is no continuity and you don't have to go any further. If there is continuity, then the piece on the pommel is either the tang or it is a metal pin that is in contact with the tang so an x-ray would then be necessary to determine which is which.
Sincerely,
RobT
|