Quote:
|
Originally Posted by urbanspaceman
Hello Ibrahiim. Re. the above: I notice that it costs a £1.0s.0d. for a 'Hollow' blade in contrast to £1.10s a dozen for other blades: essentially twelve times as much. This has to be for something more than a sharpening, or even a fuller of one sort or another. Perhaps these were the blades smuggled in from Solingen. If they wanted to sell hollow blades, even at such a price, that price had to be very competitive compared with the 'official' Solingen blades imported with appropriate duty paid.
There is that mention in a letter to Cotesworth that tells of a 'Gent' in London having to 'venture' £8.00 for a decent sword; so even after the hilting and etc., £1.0s.0d. for the blade was more than acceptable.
On another note: it appears that Carnforth was actively involved in the setting up of SB in advance of the 19 arriving. I suspect it was a joint arrangement with the Hounslow three and the Syndicate, plus Vinting. I'm using that as a working hypothesis for the time being anyway but happy to be shot down whenever.
|
As I note from a previous post what is the difference between a Hollow blade and hollow grinding. I assume hollow blade means the Colichemarde form so far as I can see never done in Shotley Bridge..I cannot believe that this could be done by hand. Hollow grinding however was something different and possible on the flat blades Shotley was turning out.
Regarding Hollow Blade machinery~ what was that? I have tried to reverse engineer this problem ~ Indications are that it was connected to small wheels as a concept. Small grinding wheels a half inch across up to about an inch across perhaps set up on a machine of quite simple mechanics. 3 small spinning grinding wheels; Inch, half inch and quarter inch diameter placed so they are almost touching in concentric form with
the Colichemarde shape in the centre. Starting with the basic blade shape of triangular main blade and a flat top cross section of about 12 inches. Several sets of these (three wheels) to cover the diminishing size of the blade moving toward the tip and that's the sword done. Final sharpening and sword complete . Without the concentric grinding wheels this would take forever.
To remind readers about the basics on Colichemarde~From
https://www.knifeplanet.net/buyers-g...words-reviews/ Quote "While the Rapier and the Small Sword are both excellent civilian weapons, they were both specifically designed for fencing with an unarmored opponent with a blade of similar weight and design. However, when facing and opponent wielding a much heavier military style blade, they both have the distinct disadvantage of being prone to break when used to parry a powerful slashing cut.
Therefore, the Colichemarde Sword was specifically designed to provide civilians with a sword that retained the speed of a Rapier and the convenience of a Small Sword but, which was also capable of parrying a blow from a much heavier sword without fear of it breaking. Therefore, the blade of the Colichemarde Sword consists of a heavy duty parrying forte combined with a much lighter and thinner cutting and stabbing section to provide a civilian swordsman with the ability to defend himself from opponents wielding much heavier, military style, blades."Unquote.