Ethnographic Arms & Armour - View Single Post

Robert · 22nd September 2015, 08:35 PM

Heat sink paste was applied above were the weld was to be made, then the tang was TIG welded and plunged into heated sand and allowed to cool slowly over a period of hours.

Best,
Robert

22nd September 2015, 08:35 PM	#6
Robert EAAF Staff Join Date: Feb 2005 Location: Centerville, Kansas Posts: 2,196	Heat sink paste was applied above were the weld was to be made, then the tang was TIG welded and plunged into heated sand and allowed to cool slowly over a period of hours. Best, Robert