Quote:
|
Originally Posted by Pukka Bundook
Battara,
Yes, the koftgari seems well done and a good thickness, unlike the modern version that shows up now.
Rick,
I have some extra photos I cam attach for you. Plug doesn't show well, and appears forged in place as to be expected.
The recoil lug appears to have been pulled out on this one, either through accident or yanking the barrel from the stock without removing the pin.
To answer your question;
It would Appear to have been in a stock at some time, but not at all recently.
I too was wondering about no provision for a pan cover. No answer on that!
You know I mentioned Oude as a possible place of origin?
well Googling that today, I found an interesting list of matchlocks and barrels From Oude.
These were taken at the surrender of Oude in 1859.
An interesting fact, is that many if not most of these are silver mounted, and have a 'belled muzzle".
These were in; "The Official Catalogue of the Museum of Artillery,
Rotund, Woolwich", by Brig. Gen J H LeFroy, RA FRS. 1864.
In all, 20 or so barrels/matchlocks are mentioned, and the very first has a 52" barrel like this one. I think all but 2 were "silver inlaid". These 2 being gold.
Interesting that one matchlock has in its description, "with a cover to the vent" which makes it sound like the others do not.
Please see link.
Richard.
https://books.google.ca/books?id=X8o...20Oude&f=false |
Hi Richard.
Thanks so much for your response. I was just wondering if your barrel was plugged in the same manner as Stewart's and mine. And it sounds like it is. I've seen one other variation of plugging the breech using a fairly thick, flat plate with a notch cut in for a rear sight. The plate is just slightly larger diameter than the breech of the barrel. The barrel they cut up in the "Mughal Matchlock" YouTube video had this style.
Sorry to hear your recoil lug is missing. But that seems to add proof that the barrel was mounted in a stock at some point.
Yes, it's obvious some of these barrels were made without pan covers. With the barrels being made so robust, I've wondered why the pan covers were made of such a thin piece of metal? It seems that most of the barrels you see today have the cover broke off. I'm going to have a new cover made for mine using a bit thicker iron, since mine is already missing.
Thanks for the Link with that list of guns. Super interesting!!! Especially the notes of barrel decoration.
By the way, the length of my barrel is 55.5".
Your barrel, with the silver work should display very well.
Rick.