Quote:
|
Originally Posted by Pukka Bundook
Rick,
What you feel at the breech is very likely the powder chamber.
In these muskets the chamber is Smaller bore than the barrel, so what appears an obstruction, is just this narrower piece.
The old Hand Gonnes were the same, with a narrower bored breech, initially made that way so the serpentine powder didn't get too compressed, as if it Was compressed it wouldn't ignite.
Question for you if I may;
does the stock fit under the arm when aiming?
I have never had hold of a torador, so am in the dark!
I recently purchased a couple of barrels and a torador needing parts, but they are still in the UK at present.
Thanks for your time Rick,
Best wishes Richard.
|
Hi Richard,
....so this raises an interesting question, as Rick, I believe, is of the opinion that the so called powder chamber is LARGER than the bore. I have no proof to the contrary, but do not believe that this would be "safe practice". Any guns with VISIBLE powder chambers such as screwoff barrel pistols have a smaller powder chamber than the bore diameter.
The outcome of this "mystery" will be interesting.....
As far as how a Torador is held for firing I guess is up to the user, much as it would be with modern firearms....some hold the stock to the shoulder and some to various points of the upper arm. Depends on what is comfortable and produces the right result.
Stu