Hello Nonoy, and thank you for your advice. I have cleaned the dust and lint from it using a clean paint brush and canned air like used to clean dust from keyboards. I then applied some ren wax to a small area on the back of the shield where it was sucked into the wood like a sponge. The wood is not delicate or falling apart when being handled it is just VERY dry like it might have been hung on a wall by a fireplace or something else that helped to over dry the wood. That is why I was asking if a light coating of either olive or linseed oil might be applied before the wax to help rehydrate the wood.
Best,
Robert
|