Ethnographic Arms & Armour - View Single Post

Henk · 12th June 2005, 10:20 AM

Gentlemen,

First I want to thank you all for your input. I was struck by these three tulwars and the kukri in the box. The other stuff was with it.

Jens,

For your information, and it is not allowed to mention prices, when I devide the total amount to the 10 pieces I bought I could tell the Mrs. that it was a bargain

Please give me some time to make the pictures you're required. Maybe tonight I have some time to spare or tomorrow. But I will make them.

The three copper dots are in a row. From the first dot to the last one, you can divide the distance in three sections. The first dot is under the hilt in the middle of the blade. The second one is two/third lower towards the tip against the back of the blade and the last one is on one/third distance from the previous one in the tip. The first and the last dot are visible on the pics.

This one is certainly my favorite, just as the third one is.

M.Carter,

The hilts are not loose. Only the cap from the second one was conected with a wedge in the pommel. That wedge is gone so i have to try to make a substitute. Maybe a metal one. That's the only point, but all three are battle ready.

Rick,

All three the blades have been sharpened. The first and the second one on the entire edge. The third one only the point. Just like it was used for fenching. The patina of the first and the second one is "original" and no spurs of varnish or lacquer. The third one is lacquered and should be cleaned. Any ideas what the most safest way is to remove the lacquer? I really wish to threat them as babys.

Last but not least, Andrew,

The straight bladed one is edged on both sides. As mentioned above it is sharpened on the tip.
These kind of blades with such a hilt were called "Firangi" according to Stone.
But these weapons used to have a khanda hilt. If i compare a khanda hilt to a tulwar hilt, the main difference is the spike at the end of the pommel. If i look to the end of the pommels of the first and the second one, they are finished off very well with a round knob. It looks to me that some idio... took a metallsaw to cut off the large end because it didn't fit into his ....???

Aparently the sawing work is finished off with a hammer to get rid of the sharp edges that remains after the sawing. I will also try to catch this in a picture. In my opinion this one is really abused by some ........

It's my pleasure to share these ones with you and learn about it.

12th June 2005, 10:20 AM	#6
Henk Member Join Date: Dec 2004 Location: The Netherlands Posts: 1,209	Gentlemen, First I want to thank you all for your input. I was struck by these three tulwars and the kukri in the box. The other stuff was with it. Jens, For your information, and it is not allowed to mention prices, when I devide the total amount to the 10 pieces I bought I could tell the Mrs. that it was a bargain Please give me some time to make the pictures you're required. Maybe tonight I have some time to spare or tomorrow. But I will make them. The three copper dots are in a row. From the first dot to the last one, you can divide the distance in three sections. The first dot is under the hilt in the middle of the blade. The second one is two/third lower towards the tip against the back of the blade and the last one is on one/third distance from the previous one in the tip. The first and the last dot are visible on the pics. This one is certainly my favorite, just as the third one is. M.Carter, The hilts are not loose. Only the cap from the second one was conected with a wedge in the pommel. That wedge is gone so i have to try to make a substitute. Maybe a metal one. That's the only point, but all three are battle ready. Rick, All three the blades have been sharpened. The first and the second one on the entire edge. The third one only the point. Just like it was used for fenching. The patina of the first and the second one is "original" and no spurs of varnish or lacquer. The third one is lacquered and should be cleaned. Any ideas what the most safest way is to remove the lacquer? I really wish to threat them as babys. Last but not least, Andrew, The straight bladed one is edged on both sides. As mentioned above it is sharpened on the tip. These kind of blades with such a hilt were called "Firangi" according to Stone. But these weapons used to have a khanda hilt. If i compare a khanda hilt to a tulwar hilt, the main difference is the spike at the end of the pommel. If i look to the end of the pommels of the first and the second one, they are finished off very well with a round knob. It looks to me that some idio... took a metallsaw to cut off the large end because it didn't fit into his ....??? Aparently the sawing work is finished off with a hammer to get rid of the sharp edges that remains after the sawing. I will also try to catch this in a picture. In my opinion this one is really abused by some ........ It's my pleasure to share these ones with you and learn about it.