Ethnographic Arms & Armour

Ethnographic Arms & Armour (http://www.vikingsword.com/vb/index.php)
-   Keris Warung Kopi (http://www.vikingsword.com/vb/forumdisplay.php?f=11)
-   -   Unusual kris for id please (http://www.vikingsword.com/vb/showthread.php?t=23885)

chiefheadknocker 29th April 2018 01:36 PM

Unusual kris for id please
 
5 Attachment(s)
I picked this kris up today for 40 gbp ,I think ive done ok , is this kris classed as a sword or is it a large dagger ? it looks to have some age , any information would be great , its unusual how the handle is is attached at this angle
thanks

Rick 29th April 2018 01:59 PM

Dimensions please??

chiefheadknocker 29th April 2018 02:01 PM

hi there the blade alone is 36cm and overall length in scabbard 45cm
thanks

Paul de Souza 29th April 2018 02:42 PM

Think it is a Peninsular piece from the North judging from the sampir - the sheath cross-piece. Blade is typical bugis inspired. Angle of the hilt is correct for me for when you hold the hilt like you would a pistol grip, the blade would be flat and lean inwards to the opponent's body for the stab between ribs and inward towards vital organs.

David 29th April 2018 04:28 PM

Not sure why you would consider 14 inches as possibly being sword length, but yes, i would certainly classify this as a dagger.
I tend to agree with Paul's description and if you hold this properly that hilt seems to be in a fairly logical position to me.
What no one has said yet is that this appears to be a rather nice keris of this type with a beautiful, well made blade and nice fittings. It does look like the sheath is missing it buntet at the end of the stem, but otherwise it looks complete and in good condition. Though we don't talk money on this forum i still must remark that you seem to have gotten quite a steal on this one. Nice catch! :)

chiefheadknocker 29th April 2018 04:40 PM

Thanks for your reply and information , I thought this would be too short for a sword but then I thought this is too big for a dagger , but then I'm a novice in this area , thanks for putting light on it ,
should i clean the blade in any way or is it best left alone ?
thanks

David 29th April 2018 06:50 PM

Quote:

Originally Posted by chiefheadknocker
Thanks for your reply and information , I thought this would be too short for a sword but then I thought this is too big for a dagger , but then I'm a novice in this area , thanks for putting light on it ,
should i clean the blade in any way or is it best left alone ?
thanks

Yeah, 14 inches (36cm) is a pretty average length for a keris dagger.
Your photos aren't great, but i don't see any active rust on the blade. It does seem a bit dark for a Peninsula blade, most people don't tend to give warangan treatment to them, but perhaps the previous collector liked it that way. I wouldn't necessarily remove the stain though. If it were mine i would probably hit it with some WD40 and brush it down well with and old toothbrush. Then i would oil it with a fragrant keris oil. I personally prefer a mix of mineral oil with sandalwood and kenanga oil.

A. G. Maisey 30th April 2018 01:33 AM

This is a very nice keris, you've done well.

jagabuwana 2nd May 2018 12:35 AM

For 40 gbp! :O what a find..

What is this pamor called? Gorgeous.

Paul B. 2nd May 2018 05:27 AM

I repeat we don't talk money.
The pamor looks a bit like the Javanese Bendo segodo.

chiefheadknocker 3rd May 2018 09:58 AM

more pics of the pamor
 
5 Attachment(s)
here are a few more pictures of the blade , this is the first kris I have ever bought and thanks to this forum learnt a lot about them , I didn't realise how much time and skill went into making these blades , sorry for mentioning money I didn't realise this was a no no on this forum.
the blade is darker than the pictures show , I had to hold the blade so the light reflected right to see the detail (pamor)

David 3rd May 2018 02:23 PM

Yep, that is a very nicely constructed Bugis blade. Congratulations! Most collectors do not do anywhere near this well on their very first keris. :)

A. G. Maisey 3rd May 2018 11:43 PM

That pendongkok looks like it might clean up as silver with a litte bit of elbow grease and some 0000 steel wool.

David 4th May 2018 02:06 PM

Quote:

Originally Posted by A. G. Maisey
That pendongkok looks like it might clean up as silver with a litte bit of elbow grease and some 0000 steel wool.

I see why you say that Alan and who knows, you may be right, but i don't think i have ever seen this style of pendokok in silver. They generally seem to be brass.
Either why, cleaning the metal up to its original luster would no doubt improve the over all look of the ensemble so if it were mine i would follow your suggestion. ;)

chiefheadknocker 4th May 2018 02:34 PM

Just to say the pendokok is brass , but I'm unsure whether to clean this or not , it takes brass a long time to go this colour and cleaning it will take all that age away ?

Rick 4th May 2018 03:12 PM

You wouldn't let your antique silverware tarnish would you? :)

I think that keris would appreciate a shiny pendokok; the original owner would not let it tarnish; he would keep it polished.

David 4th May 2018 04:33 PM

I agree with Rick on this. I like to maintain my collection as the original owners would when possible. The exterior aspects of the keris (dress) are supposed to be a respected part of ones attire and reflect the status of the wearer. Showing age through tarnished fittings would not be the way such important cultural items would be maintained. :shrug:


All times are GMT +1. The time now is 09:55 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.