Ethnographic Arms & Armour

Ethnographic Arms & Armour (http://www.vikingsword.com/vb/index.php)
-   European Armoury (http://www.vikingsword.com/vb/forumdisplay.php?f=12)
-   -   Large old ''bowie'' scout knife ? (http://www.vikingsword.com/vb/showthread.php?t=28189)

francantolin 31st August 2022 07:59 PM

Large old ''bowie'' scout knife ?
 
4 Attachment(s)
Hello dear members,

I bought this massive knife,
44cm/17,3 inches long
Not expensiv it seems a little old and I liked the
Massive shape and the horn hilt.
There is a saw on the back of the blade.

-A kind of old survival-scout knife ?

-A composite large knife ?

made with a shortened sword blade : the tip has a strange shape and the back saw goes nearly to the tip.

Have you ever seen this kind of tip on old ''scout'' knives ?
I haven't received it so I can't post other pictures for the moment ( and haven't seen if there is a stamp on the blade...)

M ELEY 2nd September 2022 03:07 AM

I like this knife! It does appear to be a composite, but that isn't always a bad thing. This piece looks like it all dates to approximately the same period. Could be either a cut-down sword or large knife. I suspect the latter based on the saw-type. Most saw/pioneer/hunting swords with saw backs have big 'teeth'. These are smaller, like those find on diving knives, etc. If only the knife could talk! It would be easy to guess origins (a Civil War Confederate side knife! A blacksmith-made gambler's boot knife! An Army scout's weapon/tool), but without provenance, it will remain a mystery. I love the rounded old brass pommel, possibly from a sword. The crossguard/ferrel looks sword-ish, but again, take a look at some of the old bowies, diver knives, etc and you might not be so sure!

Radboud 2nd September 2022 06:31 AM

Can we see the spine of the blade? It almost looks like a re-purposed file with those fine serrations.

francantolin 2nd September 2022 03:23 PM

Thank you for your messages ! 🙂

The blade maybe made with an old file ?
It's possible, I will see and post pictures when I get it ...

Interested Party 2nd September 2022 05:36 PM

I would agree with the serrations being an old file or made to be a file. I made one knife and cut half the spine into a file. I was not happy with the functionality.

The top of the sheath looks relatively new, and machine sewn. I would not be surprised if there was a liner of plastic helping it hold its shape similar to some 1970s Schrade sheaths.

francantolin 9th September 2022 05:32 PM

6 Attachment(s)
Hello,
I finally received it,
It came with a small 30cm knife ( a kind of gaucho knife or german origin )
So :
For me it must be a kind of old pioneer dagger,
Scabbard and dagger are old/ really older than the ''baldric'' who seems more recent ( 60-80's )

I prefer the dagger without it ! :)
The scabbard looks like some old german hunting daggers.
.
Interesting on scabbard and guard:
an old fixation system.
Still works good...

On the back of the blade there is more a large teeth file rather than a saw as de said.
I wonder when they will use it ??
The blade is well made ( massive with sharp ends) and I don't think they just forge it with an old file an leave it like that...

francantolin 9th September 2022 05:38 PM

4 Attachment(s)
Another pics...
Withthe interesting kind of ''locket'' system

Kind regards

francantolin 9th September 2022 05:57 PM

Quote:

Originally Posted by francantolin (Post 274924)
Hello,
I finally received it,
It came with a small 30cm knife ( a kind of gaucho knife or german origin )
So :
For me it must be a kind of old pioneer dagger,
Scabbard and dagger are old/ really older than the ''baldric'' who seems more recent ( 60-80's )

I prefer the dagger without it ! :)
The scabbard looks like some old german hunting daggers.
.
Interesting on scabbard and guard:
an old fixation system.
Still works good...

On the back of the blade there is more a large teeth file rather than a saw as de said.
I wonder when they will use it ??
The blade is well made ( massive with sharp ends) and I don't think they just forge it with an old file an leave it like that...

For the utility of the file ,
Just thought now:

for a useful survival knife: help prisonners / file through prison bars
( sure dynamite or keys are be more efficient ;) ! )

colin henshaw 9th September 2022 08:18 PM

I'm not completely certain, but I believe this type of knife was made in India in the 19th century for the colonial market.

M ELEY 9th September 2022 09:36 PM

Wow! This is a really interesting piece! Now that we see details, definitely not a file! The saw edge could have been to cut through barbed wire? The saw back looks more of a tool that a traditional hunting trousse type to skin game-

Colin, do you have any pics of those Indian side weapons? I'd love to see one for reference. Always learning...

colin henshaw 10th September 2022 08:22 AM

3 Attachment(s)
Quote:

Originally Posted by M ELEY (Post 274932)

Colin, do you have any pics of those Indian side weapons? I'd love to see one for reference. Always learning...

Mark, here are some similar examples taken off the internet for comparison...

Victrix 10th September 2022 09:34 AM

Interesting knife! At first sight the horn handle and the “pandour” tip makes it look like a hunting knife. This is further corroborated by the absence of a cross guard. On the other hand the large size of the knife and the details on the sheath (lock mechanism and metal tip on sheath) seem to indicate the possibility of professional/military (?) equipment. I was thinking the saw on the back of the blade might be useful to cut through hard bone/antlers for a hunter? The blade looks like intended mainly for thrusting. Is the edge very sharp as well?

francantolin 10th September 2022 04:22 PM

1 Attachment(s)
Thank you all for your comments,
Thank's a lot Colin for the pictures,
i haven't ever seen these models, really look like ! ( just not the crossguard...)

For the sharp edge, yes they are too on both side of the tip ,
Overall except where there is the file-saw
Interesting the massive 8mm blade that ends really sharp at edges .( sorry maybe for my bad english )
Kind regards

francantolin 10th September 2022 05:16 PM

For the militar model hypothesis or just for fix it,
Sadly no stamp/name or number on the blade or the handle

Hombre 10th September 2022 08:09 PM

Nice find but I should like to see more pictures of the other blade...
That one made me curious!:)

Best,
Stefan

colin henshaw 10th September 2022 08:17 PM

1 Attachment(s)
Here is another one, more like francantolin's knife, without a crossguard.

Interested Party 12th September 2022 05:03 PM

After reviewing post #13, the back of the blade is odd. There are three rows not one or two as for a saw back. The is no set to the teeth to clear chips. So, I don't think it is a saw.

The teeth are not raised in one direction having been cut in like a rasp, but omnidirectional like a bastard file. While it could be a file, what was it made to file? Horses' hooves? A jittery horse and a sharp hunting knife seem like a recipe for disaster. Also, files are usually fully hardened and brittle to prevent wear. To me it seems to be very aggressive decorative knurling more than anything else.

francantolin 12th September 2022 05:38 PM

2 Attachment(s)
Quote:

Originally Posted by Hombre (Post 274942)
Nice find but I should like to see more pictures of the other blade...
That one made me curious!:)

Best,
Stefan


Here two pics of the other knife, hilt seems made of horn.

Still thank you for the pictures Colin !

colin henshaw 12th September 2022 06:31 PM

1 Attachment(s)
Just trying to find out a bit more about these knives... it seems many were made by a British cutler who moved to Salem, Madras, India; some knives are marked "Arnachellum". I read that the steel of these Indian-made knives was considered superior to the European product, being hard but not brittle.

Here is an image of the 19th century big-game hunter Sir Samuel Baker with a knife in his belt that looks suspiciously like one of these Indian-produced hunting knives.

kronckew 13th September 2022 09:38 AM

1 Attachment(s)
Reminds me of a repurposed pioneer or artillerymans saw back sidearm. The English made stag gripped hunting swords with a saw back, brass D guard, but they were more elegant looking.


Mine is a bit longer, has a leather covered scabbard and a wood hilt with checkered brass fittings. It's rather heavy. Appears to be an earlier model than the straight 1856 version made up to 1900+.

colin henshaw 13th September 2022 12:34 PM

For anyone interested- a bit more information is to be found about these knives on a couple of YouTube videos by Matt Easton (Scholagladiatoria). Unfortunately I don't seem to able to do a link to them on my PC, but they should be easy to locate.

kronckew 13th September 2022 01:01 PM

Quote:

Originally Posted by colin henshaw (Post 274989)
For anyone interested- a bit more information is to be found about these knives on a couple of YouTube videos by Matt Easton (Scholagladiatoria). Unfortunately I don't seem to able to do a link to them on my PC, but they should be easy to locate.

:confused: Matt has a large number of video, most of which are VERY comprehensive, on European as well as more exotic locale bladed items.



If you can't link , a list of the youtube titles would help us find them. :D


Here's one on the 1856 pioneer sword

colin henshaw 13th September 2022 01:11 PM

Quote:

Originally Posted by kronckew (Post 274990)
:confused: Matt has a large number of video, most of which are VERY comprehensive, on European as well as more exotic locale bladed items.



If you can't link , a list of the youtube titles would help us find them. :D


Here's one on the 1856 pioneer sword

Wayne, if you do a search of YouTube for "Indian Bowie knives" you will find them straight away ;)

kronckew 13th September 2022 02:30 PM

I indded found Matt's videos on indian bowies.

Anglo indian hunting knives

the guard & blade of the OP's knife, post 1, doesn't fit Matt's description.
Neither does the other bowie from the royal armoury.

Restoring an anglo indian bowie pt. 1

The scabbard on the Indian bowie has a catch much like the OP's.
I concede the OP's knife could have been made/modified in India.

Part 2.

inc. to complete the set.


I also note that many pioneer short swords, artillery short swords, and even rifle company swords (bayonets) were also made officially in India for Indian )and western) troops. I have not seen any 'bowie' style knives from India with a saw back, like on pioneer knives. Indian maybe, custom hunting knife, maybe. The short flat false edge doesn't look very bowie-ish.


I'd like to see some that do. ;)

Interested Party 13th September 2022 02:47 PM

Sorry duplicate URL

Is there a way to completely delete posts?


All times are GMT +1. The time now is 12:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.