Ethnographic Arms & Armour

Ethnographic Arms & Armour (http://www.vikingsword.com/vb/index.php)
-   Ethnographic Weapons (http://www.vikingsword.com/vb/forumdisplay.php?f=2)
-   -   Advice on shrinked scabbards? (http://www.vikingsword.com/vb/showthread.php?t=656)

VVV 27th April 2005 10:08 AM

Advice on shrinked scabbards?
 
Dear forumites,

Now it has happened again - I can't get one of my Tenegre out of it's wooden scabbard. This is the second time it has happened to me and for some strange reasons it has only involved my Visayan swords.
All practical advice appreciated.

Thanks,

Michael

Ian 27th April 2005 12:53 PM

That's odd. Don't think I have had that problem with wooden scabbards -- leather certainly.

Have you tried rocking the sword back and forth to free it up. Sometimes a fat-bellied blade will get stuck but you can usually wiggle it loose. Eventually they do come out. Be careful the edge doesn't work through the scabbard and bite you.

Would you post some pictures of the bolo and scabbard when you get it out.

VVV 27th April 2005 01:21 PM

Hi Ian,

Sure, as soon as I get it out ;)

I have tried the wiggling part already but on the top of the scabbard there is a broad leather band.
Maybe that's what has shrunk due to change of climate?
Do you have any tips on how to solve that?

Thanks,

Michael

Rick 27th April 2005 02:07 PM

Leather Therapy (product) perhaps ?
Look at your local tack shop or do a web search .
After getting it out Possibly a little silicone spray down the scabbard mouth ?

Ian 27th April 2005 04:39 PM

Ah yes, the leather around the throat. That could be the problem.

I've also found that a little Renaissance Wax, and probably other silicone-based polishes too, applied to the blade helps things slide smoother as well protecting from rust.

VVV 27th April 2005 05:35 PM

2 Attachment(s)
I made it!
With a combination of both advices and a little force.
Here it is, the longnosed beauty.
Got it from Artzi.

Thanks,

Michael

Spunjer 27th April 2005 05:51 PM

beautiful sanduko, mike. congrats. now oil that baby before it get stuck again...

Ian 27th April 2005 07:31 PM

Sweet
 
Michael:

Very nice sanduko bolo -- these are very uncommon and hard to find in such good condition. Lovely hilt. :D

Must get Battara to take a look at this one -- Jose, what you think one of these silver hilts would cost to make? ;)

VVV 27th April 2005 09:45 PM

Thanks all,

Now it's oiled and as a bonus I even know what it is.

Michael

tom hyle 28th April 2005 01:24 AM

Wow; deluxo!

Rick 28th April 2005 02:22 AM

Have you identified the domed coins that are used on this hilt ?
As I recall it is missing one or two on the other side , no ?
These could probably be easily replaced . :)
Silver is a snap to work with . :D

VVV 28th April 2005 10:01 PM

Yes, it's the opposite "ear-part" that is missing a coin and 2 smaller silver disks. Not sure if I really want to replace it.

Michael

Battara 30th April 2005 01:49 PM

I had been looking at that and what the replacement needs would be. I would have to price out US issued PI silver coins of the same era and then shape them and then work on the silver stem to make them stay. Not that difficult of a process overall. Most of the price would depend on the coins used.

Rick 30th April 2005 02:41 PM

Quote:

Originally Posted by Rick
Have you identified the domed coins that are used on this hilt ?
As I recall it is missing one or two on the other side , no ?
These could probably be easily replaced . :)
Silver is a snap to work with . :D

I should have qualified that statement a little ; work such as this is fairly easy ; when I was a kid we all made rings from silver quarters ; lots of tapping on the edge and after a few hours , drill out the center and file smooth .

Now repousse and engraving etc. that's a whole 'nother ball game . :D

VVV 30th April 2005 04:03 PM

Thanks, will give it a try.
But have to wait until next time in US to get the proper coins.

Michael

Battara 30th April 2005 05:23 PM

Sorry Ian, did not read your post as carefully as I should have. To make this hilt out of silver.....hmmm......the work itself might cost $500? Lot of work would go into something like this. Wonderful puppy!(woof)


All times are GMT +1. The time now is 12:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.