Ethnographic Arms & Armour

Ethnographic Arms & Armour (http://www.vikingsword.com/vb/index.php)
-   Ethnographic Weapons (http://www.vikingsword.com/vb/forumdisplay.php?f=2)
-   -   Tabar axe query. (http://www.vikingsword.com/vb/showthread.php?t=28508)

Mel H 14th January 2023 02:12 PM

Tabar axe query.
 
3 Attachment(s)
among my accumulation of Indian bits and pieces I have a couple of substantial axes which I would be interested to learn something about.
They're in good sound condition, quite simple in their design with no decorative embellishments and are certainly of good quality. The heads and spikes are steel and the handles are solid brass. Overall length is 29 inches (74 cm). They were clearly highly polished when new and I wondered if they may have been for 'guards' use.

mahratt 14th January 2023 03:12 PM

Hello, Mel H
I think this is a ceremonial ax or one of those "Indo-Persian axes" that were made in the late 19th and early 20th century for Europeans who wanted to decorate their "oriental rooms with similar items".

BBJW 14th January 2023 04:15 PM

Decorative/souvenir piece. Real ones were all steel except for perhaps a brass decoration on the 'hammer' and a screw in spike in the handle with handcut threads.--bbjw

ariel 14th January 2023 07:28 PM

Real fighting and utility axes have wedged blades. This one is practically flat.
Agree with others: either ceremonial, but more likely for those who travel.

kronckew 15th January 2023 08:02 AM

Quote:

Originally Posted by ariel (Post 278040)
Real fighting and utility axes have wedged blades. This one is practically flat.
Agree with others: either ceremonial, but more likely for those who travel.


Correct. I noted a casting flaw on the brass hammer part, and a brass haft is not very useful for an impact weapon, it'd bend easily. Also galvanic corrosion of the steel parts may occur.

Tim Simmons 15th January 2023 08:05 AM

To me it looks all steel, you can see the steel showing through the gilding. Gilding would suggest a ceremonial piece. As for flat blades not being practical weapons, I have had many heavy flat axe blades of Indo/Persian form from the Sudan also axes from most of Africa. I think it quite possible to hurt somebody with this axe.

kronckew 15th January 2023 08:10 AM

Quote:

Originally Posted by Tim Simmons (Post 278051)
To me it looks all steel, you can see the steel showing through the gilding. Gilding would suggest a ceremonial piece. As for flat blades not being practical weapons, I have had many heavy flat axe blades of Indo/Persian form from the Sudan also axes from most of Africa. I think it quite possible to hurt somebody with this axe.


Could be. Might even be 'gold' paint. I took the OP's word it was brass. A magnet would test it easily. Still even if it's steel under the gold stuff, the flat blade is telling.

Jerseyman 15th January 2023 11:53 AM

To me it looks as though the gilding on the shaft has been painted on, and not very well done. That said, I suppose it could be vertical scratching, but it seems to have that quality of bristles separating on a rounded surface to leave lines that are not quite straight. Certainly when you look at the hammer the edges seem to have worn back down to steel.

Tim Simmons 15th January 2023 12:06 PM

If it is late 19th early 20th century, it has worn very well perhaps quite A heavy gild or been on a wall nearly all the time. I have not done fire gilding as it is illegal. Gold suspended in mercury could be painted on before burning off the mercury. The fact that it is gilded might indicate that the may have been a prestigious item?

Richard G 15th January 2023 02:08 PM

Are we sure it's not lacquered brass where the lacquer has been scratched or worn and the brass tarnished underneath?
Best wishes
Richard

kronckew 15th January 2023 06:08 PM

Quote:

Originally Posted by Richard G (Post 278065)
Are we sure it's not lacquered brass where the lacquer has been scratched or worn and the brass tarnished underneath?
Best wishes
Richard


He'll need to touch the haft with a magnet, if it doesn't stick it is likely brass. If it sticks...


It's still a sows ear trying to turn into a silk purse.

David R 15th January 2023 06:32 PM

Very late period, ceremonial or made for those who travel.....

BBJW 15th January 2023 07:23 PM

Quote:

Originally Posted by BBJW (Post 278032)
Decorative/souvenir piece. Real ones were all steel except for perhaps a brass decoration on the 'hammer' and a screw in spike in the handle with handcut threads.--bbjw

I should have added that this axe with a spike was for a mahout's (elephant driver) use and not meant to be a battle axe.-- bbjw


All times are GMT +1. The time now is 01:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Posts are regarded as being copyrighted by their authors and the act of posting material is deemed to be a granting of an irrevocable nonexclusive license for display here.