PDA

View Full Version : My Newly Restored Moro Kris Swassa/Silver


Battara
2nd October 2023, 02:30 AM
Greetings again folks,

Here is a kris that was many years in the making.

First I got the blade from Spunger (salamat Ron). So I took rust off the blade and restored the silver inlays. Afterwards I etched the blade. In one of the pictures you can see almost a Tibetan hairpin turn lamination at the tip. The center of the blade has many laminations.

Second, I purchased a pommel from eBay in very bad shape. I restored it, but had to use an old Moro form of repair by covering over destroyed parts with swassa covered brass.

Third, the hilt also came a few years later from Spunger. I used the silver woven bands but I made the swassa on brass bands. The bands are in Maguindanao okir and based on those of my original hilt made of the same stuff (but this original kris was stolen years ago).

Finally I made the baka-baka clamp from silver.

Once a week I work on my own stuff. So enjoy!

Battara
2nd October 2023, 02:33 AM
Here are pictures of the blade.

Changdao
2nd October 2023, 09:38 AM
It looks amazing!

werecow
2nd October 2023, 12:45 PM
Do you have any pictures of the components before restoration? I'm curious to see the difference.

JeffS
2nd October 2023, 01:22 PM
Stunning work, thank you for sharing!

Rafngard
2nd October 2023, 04:57 PM
My jaw just dropped.

Excellent work.

kino
2nd October 2023, 05:30 PM
Excellent work!

“I made the swassa on brass bands”, it’s gold plated?

Battara
2nd October 2023, 11:53 PM
Thank you folks.

Werecow - Here are pictures of how I got the pieces (except the pommel).

You can see missing silver from empty grooves in the blade, and not much on the hilt except the woven silver bands. At the top of the hilt is a piece of kamagong/makassar ebony.

Battara
2nd October 2023, 11:56 PM
Kumusta Albert!

Yes the okir bands are 14k rose gold filled (thicker than plating) bonded to brass beneath.

werecow
3rd October 2023, 11:12 AM
Very nice!

Sajen
3rd October 2023, 01:33 PM
Nicely done, congrats Jose! Can I assume that both crests of the ivory pommel are damaged?

Regards,
Detlef

Battara
4th October 2023, 02:00 AM
Hi Detlef - yes both beak and tail are damaged. So in accordance to Moro tradition, I covered the damage with gold plated metal with okir design.

Battara
6th August 2024, 09:55 PM
Here are pictures of the scabbard I made. The top wranga is made of burled walnut and the rest is made of walnut. Bands are made of silver.

Armas
7th August 2024, 07:26 AM
wow! that was an amazing work! any youtube video on your restoration work!

Battara
8th August 2024, 06:07 AM
Thank you. No not yet, but you are not alone in encouraging me to do Youtube.

TVV
8th August 2024, 06:31 AM
Thank you. No not yet, but you are not alone in encouraging me to do Youtube.

For one, if you were to start a channel Jose, I will subscribe immediately. Your craftsmanship is spectacular and your restorations are done in a way that is culturally and historically respectful to the weapons, the way it should be done.

Battara
9th August 2024, 02:52 AM
I'm honored, Thank you! :)