View Full Version : Pattani - Old and New look
rasjid
16th May 2013, 02:48 AM
I understand that in the old chat forum there were discussion to keep the rongko as found, and prefer just do some cleaning as required. Some forum member like to bring back to their old glory....
I prefer to bring back to their old glory
:)
Jean
16th May 2013, 10:30 AM
Hello Rasjid,
Which are the new look and the old look on these pics? Personally I find that the natural kemuning wood appears too much yellow and deserves to be dyed but this is only my personal taste :)
Regards
Gustav
16th May 2013, 11:05 AM
I think, it is generally better to have a good patience regarding such things. In a couple of years your taste may change, yet the process you have done is not reversible.
rasjid
16th May 2013, 11:25 AM
Hi Jean,
The original as found is the first picture, the wood grain does not shown.
Hi Gustav
Noted your comment. I just like to see and bring back the original wood grain. I do have cirebon rongko as well but due its just old and normal wood so I only clean the rongko.
So its matter of preference.
Thanks
Jean
16th May 2013, 01:18 PM
Hi Rasjid,
OK, thanks, the wood grain is very nice indeed but its colour appears quite different on the 2 bottom pictures. :)
Regards
rasjid
16th May 2013, 01:58 PM
Yes Jean,
hallogen light in room with blackberry photo technology.
Sorry... :D
David
16th May 2013, 02:38 PM
Hi Rasjid,
OK, thanks, the wood grain is very nice indeed but its colour appears quite different on the 2 bottom pictures. :)
Regards
Yes Jean, do take into account that not only were these images taken with different camera, but under completely different light sources. Every light has a different color temperature and unless Rasjid is a professional or advanced amateur photographer he is probably just using the auto function on these cameras which are rather hit or miss. Frankly i doubt any of these images give an accurate portrayal of the true color of the wood on this sheath.
rasjid
16th May 2013, 02:46 PM
.
Rick
16th May 2013, 02:52 PM
Rasjid, what did you use for a finish on the wood ?
rasjid
16th May 2013, 05:27 PM
Hi Rick,
I give it to the worongko guy, thats the luxury I can get here in Jakarta.
For smaller jobs normally I do it myself.
He told me sanding down the wood with sand paper till 1000 grid, and use shellac + spirtus? Dont know in english :D then the long and tiring polishing by hand with the dry powder.
I myself using dried automotive paste, if I do it myself to bring on the natural shine.
Rick
16th May 2013, 06:05 PM
I thought it looked like shellac; it gives the best finish imo .
You have a good refinisher; the finish looks lovely .
rasjid
16th May 2013, 06:09 PM
Agreed. Thanks Rick
Sajen
16th May 2013, 09:24 PM
Hello Rasjid,
I personally think that you have done well. I have had the same problem with a sheath which hasn't shown it's beauty, look here: http://www.vikingsword.com/vb/showthread.php?t=11592
This sheath was also restored with shellac.
Regards,
Detlef
rasjid
17th May 2013, 03:23 AM
Nice one Detlef.
I have view projects on new rongko which I will do it myself as a learning process while watching TV.
:D
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.